IWATSU SY-8218/SY-8219 B-H Analyzer - DC-bias +POWER LOSS test system - B-H分析仪（软磁芯） - 力高捷创仪器-日本岩崎总代理BH分析仪-CS半导体参数分析-双脉冲动态-PEM罗氏线圈-N4L环路分析仪-PMK FF1500光隔离探头

IWATSU SY-8218/SY-8219 B-H Analyzer - DC-bias +POWER LOSS test system

产品型号：SY-960 原产地：日本

所属类别：B-H分析仪（软磁芯）

产品简介：

最大30A的直流偏置能力，匹配SY-8218型BH分析仪系统，可以实现业界最大交直流叠加的应用场景，可以最大程度仿真功率电感应用场景！

产品特点

产品参数

应用说明

功能配置

资源下载

轻松准确地自动测量直流偏置特性，如功率电感器
		SMD 功率电感器环形线圈最大直流偏置：30A 最纹：±6A 测量频率（正弦波）： 10kHz 至 3MHz 测量频率（方波）： 10kHz 至 1MHz（10%-90% Duty）方波（流过试样电流为三角波状=模拟斩波器），在正弦波上重叠直流来测定磁特性

芯片电感器的测量示例（斩波器激励）

Automatic test on power inductor properties with DC biasing
		SMD Power inductorToroidal coil inductor DC bias current: 30A, max AC Ripple current: ±6A, max Test frequency(Sinusoidal): 10kHz to 3MHz Test frequency(Pulse): 10kHz to 1MHz (Duty10%-90%) Pulse(Triangular signal waveform in current at specimen, called QUASI-CHOPPER), or Sinusoidal test with DC biasing

DC Bias Tester SY-960 Specifications

Items		Specifications
Measurement Frequency	SINE	10kHz to 3MHz (with SY-8218), 10kHz to 1MHz (with SY-8219)
	PULSE	10kHz to 1MHz (Duty 10 to 90%)
Measurement Temp.		0ºC to +250ºC
Max. Input Current		±6A
Max. Input Voltage		±200V
Performance Guarantee Temp.		+18ºC to +28ºC
Operation Humidity		Less than 85%RH (+35ºC, No Condensation)
Warm up Time		Accuracy of current is the guaranteed value after the 30 minutes warm-up time.
Dimensions (mm)		330(W) x 320(D) x 200(H) Excluding projection
Weight		Approx. 6.7kg
Accessory		DCT Cable (SY-963) x 1, PCB1528-030 x 1, PCB5650-079 x 1 Thumbscrew for the terminal block: x 2, Blower brush x 1, Accessory Case x 1 Instruction Manual CD x 1, User's Guide (A4 size) x 1

ItemsSpecificationsPower SupplyAC100V to 240VPower ConsumptionMax. 640VA (with SY-962)Current ldcDC 0.00 to 30.0ACurrent Resolution0.01ACompliance VoltageMax. 10V (between H-L)Performance Guarantee Temp.+18ºC to +28ºCOperation HumidityLess than 85%RH(+35ºC, No Condensation)Dimensions (mm)420(W) x 480(D) x 221(H) Excld. projectionWeightApprox. 15.3kgAccessoryPower Code x 1, Code x 1

ItemsSpecificationsPower SupplyDC24V(Supplied from SY-961)InductanceApprox. 1.68[mH]±15% (between H-L)Max. Input Current30.0APerformance Guarantee Temp.+18ºC to +28ºCDimensions (mm)420(W) x 80(D) x 110(H)Excld. projectionWeightApprox. 14.0kgAccessoryJoint Fittings x 4ACB Cable L x 1ACB Cable S x 1DC Cable L Red/Black x 1eachDC Cable S Red/Black x 1each

	在实际电路中，直流磁场和交流磁场通常施加到磁性元件上，测量直流偏置变化的磁特性非常重要。

		ferrite L=1.0μH


		Fe-Based amorphous L=311μH


		iron powder L=8.4μH

* 直流偏置测试仪是 SY-8218 和 SY-8219 的专用选项，不能用于其他设备。
• 出厂时需要与 B-H 分析仪主体进行调整。
* 如果您已经拥有主体（SY-8218/8219），则需要在我们的工厂进行更换和调整。

DC-bias test system is uniquely used as an option for SY-8218 or SY-8219 and not be used with other equipment. Adjustment and inspection as a system with BH analyzer is requited.
BH analyzers(SY-8218/SY-8219) at the customer end will be returned to our factory for adjustment and inspection when DC-bias test system can be configured as a system.