XITRON 2801/2802 Sitron Power Analyzer

Model：2801/2802 Country of Origin：USA

Category：Power Analyzer

Overview：

Frequency Range: DC, 20mHz～200KHz Graphical display of numeric results, waveforms, curve charts, power-on function modes and rapidly rising change characteristics

16-bit A-D processor with sampling rate up to 235 times per second 12-pin user I/O port configuration Supports USB flash drive for data storage

Multiple Communication Interfaces: GPIB (IEEE-488), RS-232, USB, Ethernet

Features

Specifications

Application Notes

Functions & Configuration

484×291

Highest Performance-to-Cost ratio in the industry
Base accuracy<0.08%. Current and voltage accuracies specified to less than 1mArms and 1Vrms respectively (<0.2%)
2000Vpk and 150Apk measurable internally (external CT capable)
Integrated line switch and inrush waveforms
Graphics display shows numerical results, waveforms, bar graphs, startup & history charts with zoom & scroll features
Wiring loss and voltage burden compensation
DC charge and discharge measurements
Frequency Range: DC and 20mHz – 200kHz
Communications ports include USB, GPIB, and RS-232 standard, plus optional Ethernet*
USB Flash drive support for data logging*
Provides PASS/FAIL tests to user limits*

2801/2802Advantages over ordinary power meters:

● Minimum measurable current is 100uA

● Very high overall cost-performance, with 12 I/O ports ensuring convenient and reliable data transmission.

● Backlit 240 * 64 LCD graphic display for clearer reflection of test parameter details

● Powerful harmonic function, capable of testing up to the 100th harmonic, and can decompose any order combination of the 100th harmonic according to customer requirements

total distortion (such as 3rd, 5th, 7th, 9th, 11th, etc.)

●<0.08% base accuracy, 0.001uW resolution, CF value of 999, 5-digit data display resolution, 100 times/S

high sampling rate ensures authentic test data. (Currently, power instruments on the market have a sampling rate of only about 5 times/S)

● The graphical display interface can display test data as waveforms or lists, facilitating statistical organization.

● Built-in power switch design ensures inrush current testing.

● Hourly power dissipation testing meets the special needs of more appliance and power supply industries.

● DC and AC (20mHz-200KHZ) testing better meets applications in industries such as LED driver power supplies. (Few power meters can test in

DC environments)

● For discontinuous standby modes, testing standby power consumption requires DC input, and the 2801/2802 is fully up to the task.

● The delay from data (including harmonics) testing to display is only 200 milliseconds, while ordinary power meters take as long as 2 seconds or more.

Best cost-performance in the industry
Built-in internal measurement up to 2000Vpk and 150Apk (external CT <Hall effect device> can be connected)
The two channels are independent and synchronously measured, including input/output efficiency and loss (2802 only)
Basic accuracy: <0.08%, current and voltage accuracy less than 1mArms and 1Vrms respectively (<0.2%)
Can measure and display: voltage, current, power, frequency, harmonics, THD, CF, PF, K-Factor, third harmonic distortion, surge, distortion, pulse interference, glitches — a total of 232 parameters
PASS/FAIL testing can be used to set limits for users
Complete linear switching and surge waveforms
Power or load measurement with wiring loss and voltage load compensation
Battery DC charge/discharge measurement
Frequency range: DC, 20mHz～200KHz
Graphical display of numerical results, waveforms, curve graphs, power-on function modes, and rapid rise characteristics
16-bit A-D processor, up to 235 samples per second
Up to 12 user I/O port configurations
Supports USB flash drive for data storage (option)
Multiple communication interfaces: GPIB (IEEE-488), RS-232, USB, Ethernet
Matching AC, DC, single-phase 3-wire, two-phase 3-wire, input/output synchronous and independent measurement (2802 only)

Basic specifications

Voltage measurement range: max 2000Vpk                          (850Vrms) continuous
Internal current measurement range: max 150Apk                       (30Arms) continuous
External current transducer measurement range: max 35Vpk                  (15Vrms) continuous

Frequency measurement accuracy: 0.005%
Crest factor (CF) accuracy: V (50mV+0.01% of pk rng) / RMS value, A (50uA+0.01% of pk rng) /

RMS value
Harmonic accuracy (voltage & current): 0.02%
Waveforms: current waveform, peak capture, distortion, glitch capture; linear conversion:
Max power-on voltage: 720Vpk (480Vrms)
Max power-on current: 10Arms
Start phase: 1° resolution
Communication interfaces: GPIB, USB, RS-232, data IO interface, Ethernet
Operating environment: 0℃～55℃, <95% RH
Storage environment: -20℃～70℃, <95% RH
Power input: 100V～240Vrms 50/60Hz
Dimensions: 119(H)×351(W)×241(D)mm
Weight: 3.4kg

Looking for more sales, technical and solutions information?

XITRON 2801/2802 Sitron Power Analyzer

Leave a Message