Model：CS-3200 Country of Origin：Japan
Category：Semiconductor Parameter Analyzer
Suitable for static parameter characterization of various semiconductors such as IGBTs, MOSFETs, transistors, and diodes. Maximum peak voltage 3,000 V (high-voltage mode), maximum peak current 400 A (CS-3200 high-current mode). All models feature LEAKAGE mode (cursor resolution 1 pA), USB ports for saving waveform data and setup data, and a dedicated LAN interface for remote control.
Suitable for characterizing IGBTs, MOSFETs, transistors, diodes, and other semiconductors
Maximum peak voltage 3,000 V (high-voltage mode)
Maximum peak current 1,000 A (CS-3300 high-current mode)
All models feature a LEAKAGE mode (cursor resolution 1 pA)
USB ports for saving image and setup data
Dedicated LAN interface for remote control
Configuration screen
Example V-I characteristics of a transistor (TRACE mode)
Vbe/Ic waveforms in high-current pulse mode (WAVE mode)
| Model | Common to CS-3000 series |
|---|---|
| Mode/Polarity | Full-wave rectification/+- , DC/+- , LEAKAGE/+- , AC |
| Maximum peak voltage/current | Maximum peak voltage / Maximum peak current (maximum peak pulse current*) 3kV 75mA (150mA*) 300V 750mA (1.5A*) 30V 7.5A (15A*) |
| Maximum peak power | 120mW / 1.2W / 120W / 390W (cannot be set when using maximum peak voltage 3kV) |
| Horizontal axis range | 50mV～500V/div |
Possible maximum instantaneous current value (varies depending on the DUT or conditions). Ensure measurement is below the maximum peak current value.
| Model | CS-3100 | CS-3200 | CS-3300 |
|---|---|---|---|
| Mode/Polarity | HC mode not equipped | Pulse／+－ | |
| Maximum peak voltage Maximum peak current Maximum peak power | Maximum peak voltage / Maximum peak current/power 40V 400A / 4kW 40V 40A / 400W | Max. peak voltage / Max. peak current/power 40V 1000A / 10kW 40V 400A / 4kW 40V 40A / 400W | |
| Pulse width | Pulse width adjustable within 50μs to 400μs (10μs resolution) | ||
| Measurement points | Specifiable measurement point (10μ resolution) | ||
| Vertical axis range | 100mA～50A/div | 100mA～100A/div | |
| Test stand | CS-301 | CS-302 | |
| Loop Compensation | Hardware | Compensates floating capacitance between the collector supply and ground | |
| Software | Simulated loop processing via software thin-line processing | ||
| Step signal generator | Offset | Setting range Resolution | -10x to +10x of the STEP AMPLITUDE setting 1% of the STEP AMPLITUDE setting |
| Current mode | Amplitude range Maximum current Maximum voltage | 1 step 50nA to 200mA, 21 steps 1-2-5 switching 2A 10V or more | |
| Voltage mode | Amplitude range Maximum current Maximum voltage | 1 step 50nA to 2V, 6 steps 1-2-5 switching ±40V 500mA～(～8V)、200mA～(～15V)、10mA～(～40V) | |
| Step rate | 2x of 50Hz or 60Hz (1x in AC mode); pulse interval in HC mode | ||
| Pulse/step | Pulse width | 50μs to 400μs (10μs steps) In HC mode, large pulse width of 100μs before and after the collector supply pulse | |
| Number of steps | 0 to 20 steps | ||
| AUX output | Range | OFF, -40V to +40V (adjustable in 100mV steps) | |
| Measurement mode | REPEAT、STOP/SINGLE、SWEEP | ||
| Vertical axis (full scale 10 div) | Collector current | Range | HV mode: 1μA/div to 2A/div, 20 steps, 1-2-5 switching (HC mode specified separately) |
| Accuracy | 2% of reading + 0.05 × VERT/div Plus loop correction error for each maximum peak voltage below 0.5μA（30V）、1μA（300V）、6μA（3kV）、12μA（5kV） Specified at 10% or more of the maximum peak voltage of 30V, 300V, 3kV, and 30% or more for 5kV | ||
| Emitter current （LEAKAGE） | Range | 1nA/div to 2mA/div, 20 steps, 1-2-5 switching (Collector power supply mode is LEAKAGE) | |
| Accuracy | 2% of reading + 0.05×VERT/div + 1nA or less | ||
| Horizontal axis (full scale 10 div) | Collector voltage | Range | HC mode: 50mV/div to 5V/div, 7 steps 1-2-5 switching (HV mode specified separately) |
| Accuracy | 2% of reading + 0.05 × HORIZ/div or less | ||
| Base/emitter voltage | Range | 50mV/div to 5V/div, 7 steps, 1-2-5 switching | |
| Accuracy | 2% of reading + 0.05 × HORIZ/div or less | ||
| Display | Display | 8.4-inch TFT LCD | |
| Number of data | 1,000 points/curve (AC, full-wave rectification) 20 to 1,000 points/curve (SWEEP mode) | ||
| Curve display | Inter-dot interpolation display, dot display | ||
| Average | OFF, 2 to 255 times | ||
| Retention time | OFF, SHORT, LONG, infinite | ||
| Internal waveform storage (REF) | 4 screens | ||
| Cursor measurement | DOT | Vert, Horiz, β or gm | |
| fLINE | Vert、Horiz、1/grad, intercept | ||
| FREE | Vert, Horiz, β or gm | ||
| WINDOW | Vert, Horiz, β or gm of WINDOW area | ||
| Data save/load | Internal memory | Settings: 256, REF: 4 screens | |
| External memory | USB1.1: Settings, waveform, screen hard copy (BMP, TIFF, PNG) | ||
| Remote | Equipped with remote 10BASE-T/100BASE-TX1 port via LAN connection | ||
| Power supply | CS-3xxx | AC100-240V 50/60Hz, maximum power during operation: 500VA, standby: 7W Max | |
| External dimensions (mm) Weight | CS-3100 | Approx. 424W x 220H x 555D(excluding protrusions and accessories), approx. 28kg(excluding accessories) | |
| CS-3200,3300 | Approx. 424W x 354H x 555D(excluding protrusions and accessories), approx. 43kg(excluding accessories) | ||
| CS-3100 standard accessories | ||
|---|---|---|
 CS-301 Test fixture S |
|  |
| CS-3300 / CS-3200 standard accessories | ||
|---|---|---|
 CS-302 Test fixture M |  CS-500 Test Adapter |  |
 Test lead set | ||
| CS-500 Test Adapter | |
|---|---|
 | Fixtures required to connect user-prepared DUT components to the test fixture. (Standard accessory) |
Looking for more sales, technical and solutions information?
Contact Us >
TEL: 0731-85260926
Fax: 0731-85263946
E-mail: sales@jectronic.com
Address: Room 1015, Building A3, Changsha Yu Center, No. 289 Huanbao Middle Road, Yuhua District, Changsha City
Copyright © Changsha Ligao Jiechuang Instruments Co., Ltd.
Copyright Jectronic instruments ltd, All Rights Reserved
For more information, please follow our WeCom.
Technical Support
Feedback