Key Features

• 

  High-range, high-speed measurement

  ±10 V, ±50 mA (DC/pulsed)
  1 pA/1 μV resolution, up to 1 MS/s sampling rate
• 

  12-channel source measure unit

  Integrated four-quadrant voltage/current source and measurement
  Measure current and voltage on 12 channels simultaneously with a single instrument
• 

  Adaptive PFC system

  Adjustable APFC parameters
  (Adaptive Precise-Fast Control)
  Users can tune parameters to match load characteristics
• 

  Sensing modes

  Supports 2-wire or 4-wire (remote sense) connections
  Maximum sense lead resistance: 1 kΩ (at rated accuracy)
  Maximum voltage between remote output and sense terminals: 0.5 V

Features and benefits

• 

  5 functions in one

  Voltage source
  Current source
  Ammeter
  Voltmeter
  Electronic load
• 
  Quadrants I and III operate as a source: the actual polarity of the V/I output follows the source setting;
  Quadrants II and IV operate as a load: CC and CV work together; when used as a load, the load setting polarity is opposite to the source polarity;
• 

  Capable of testing a wide range of devices

• 

  Capture more measurement data

  ♦ 6½-digit resolution: accuracy comparable to a 6½-digit DMM;
  ♦ 1 pA / 1 μV resolution: exceptional sensitivity for setup and measurement;
  ♦ 1 M points/s: high-speed measurement with fast setup and digitization rates for arbitrary waveform generation and list sweeps;
• 

  Extensive sweep capabilities

Voltage specifications  

[1] Do not connect the Guard terminal to any output, including shorting it to chassis ground or output LO, otherwise the instrument will be damaged

[2] Accuracy calculation example: to test the accuracy of a 1 V output on the 10 V range, the tolerance is:

[3] All channel outputs are electrically isolated from earth ground, but the outputs of all channels share a common ground (LO)

Current specifications