Lianxun Instruments S2016C Single-Channel PXIe Plug-in Source Measure Unit Precision Power/Measurement Unit ±200 V, ±1 A (DC), ±3 A (pulse)

Model：S2016C Country of Origin：China

Category：SMU Source Measure Unit

Overview：

Lianxun Instruments S2016C A compact, cost-effective single-channel PXIe source/measure unit (SMU) that simultaneously sources and measures voltage and current. It delivers up to ±200 V, ±1 A (DC), ±3 A (pulsed), and 20 W of constant power, supports standard SMU SCPI commands for quick and easy migration of existing test code, and is compatible with PXIe chassis from major vendors. Multi-card synchronization is supported, enabling integration into production test systems to boost throughput and reduce cost.

Features

Specifications

Application Notes

Functions & Configuration

Features

High precision
Resolution down to 1 fA / 100 nV
High range, high-speed measurement
±200 V, ±1 A (DC),
±3 A (pulse);
sampling rates up to 1 MS/s
Adaptive PFC system
With the Adaptive PFC
(Precise-Fast Control) system,
users can adjust parameters according to load characteristics
Building a Single-Channel Test System
Based on a standard PXIe chassis for easy expansion

Features and Benefits

5 functions in one
Voltage source
Current source
Ammeter
Voltmeter
Electronic load
Quadrants I and III operate as a source: the actual polarity of the V/I output follows the source setting;
Quadrants II and IV operate as a load: CC and CV work together; when used as a load, the load setting polarity is opposite to the source polarity;
Test a wide range of devices
Capture more measurement data
♦ 6½-digit resolution: accuracy comparable to a 6½-digit digital multimeter;
♦ 1 fA / 100 nV resolution: excellent sensitivity for both sourcing and measurement;
♦ 1 M points/s: high-speed measurement with fast setup and digitizing rates for arbitrary waveform generation and list sweeps;
Extensive sweep capabilities

Voltage specifications

Voltage accuracy	Range	Measurement resolution	Accuracy (1 year) ±(% reading + offset)1	Typical noise (RMS) 0.1 Hz-10 Hz
	±200 V2	100 μV	0.03%+10 mV	400 μV
	±40 V	10 μV	0.03%+2 mV	100 μV
	±20V	10 μV	0.03%+1 mV	50 μV
	±2 V	1 μV	0.03%+100 μV	10 μV
	±0.6 V	100 nV	0.03%+50 μV	2 μV
Temperature coefficient	±(0.15 × accuracy specification)/℃ (0℃-18℃, 28℃-50℃)

Overshoot	<±0.1% (typical, Normal, step is 10% to 90% of range, full-scale point, resistive load test)
Noise 10Hz-20MHz	20 V voltage source, 1 A resistive load, <5 mVrms

Current specifications

Current accuracy	Range	Measurement resolution	Accuracy (1 year) ±(% reading + offset)	Typical noise (RMS) 0.1 Hz-10 Hz
	±3 A1	1 μA	0.03% + 2mA	20 μA
	±1 A	100 nA	0.03% + 90 μA	4 μA
	±100 mA	10 nA	0.03% + 9 μA	600 nA
	±10 mA	1 nA	0.03% + 900 nA	60 nA
	±1 mA	100 pA	0.03% + 90 nA	6 nA
	±100 μA	10 pA	0.03% + 9 nA	700 pA
	±1 μA2	100 fA	0.03% + 200 pA	20 pA
	±10 nA23	10 fA	0.06% +9 pA	600 fA
	±1 nA23	1 fA	0.1% +3 pA	60 fA
	±100 pA23	1 fA	0.3% +1 pA	30 fA
Temperature coefficient	±(0.15 × accuracy specification)/℃ (0℃-18℃, 28℃-50℃)

Overshoot	<±0.1% (typical, Normal, step is 10% to 90% of range, full-scale point, resistive load test)

1. The 3 A range supports pulse mode only; accuracy is typical

2. For weak low-current measurements, it is recommended to keep using triaxial cable connections. If a triaxial terminal is used to convert to ordinary wiring output, the current accuracy of the instrument will be affected

3. Additional specification conditions: NPLC configured to 10 PLC

Pulse source specifications (4-wire)

Minimum programmable pulse width	100 μs
Pulse width programming resolution	1 μs
Pulse width programming accuracy	±10 μs
Pulse width jitter	2 μs
Pulse width definition	As shown in the figure below, the time from the 10% leading edge to the 90% trailing edge

Pulse specifications	Maximum current limit	Maximum pulse width	Maximum duty cycle
1	0.1 A/200 V	DC, unlimited	100%
2	1 A/20 V	DC, unlimited	100%
3	3 A/66.6 V	1 ms	5%
4	3 A/160 V	400 μs	2%

Looking for more sales, technical and solutions information?

Lianxun Instruments S2016C Single-Channel PXIe Plug-in Source Measure Unit Precision Power/Measurement Unit ±200 V, ±1 A (DC), ±3 A (pulse)

Voltage specifications

Current specifications

Pulse source specifications (4-wire)

Leave a Message