Quick Contact>

Hotline

0731-85260926 18665876229

中文
Power Transistor Curve Tracer Semiconductor Parameter Analyzer SMU Source Measure Unit Dynamic Parameter Test System CV Parameter Tester Gate Charge (Qg) Tester WAT Wafer Acceptance Test System TLP Transmission Line Pulse EMMI Low-Light Infrared Fault Localization HCI/BTI/TDDB/EM effects Femtoammeter/Electrometer/High Resistance Meter High and low temperature electrical performance simulation H3TRx Customizable System Integration Software
Standard Manual Probe Station Portable Desktop Probe Station Semi-automatic probe station RF/Microwave Probe Station High/Low Temperature Probe Station Vacuum cryogenic probe station system Wafer electrical parameter test system Strong Magnetic - Hall Probe Station Custom Precision Probe Card High/Low Temperature Chuck System (Taiko) Magnetic Probe Holder CCD Microscope Test cables and adapter fixtures Shielded Box and Vibration Isolation Table Probes and other accessories
B-H Analyzer Magnetic Loss Power Tester Impedance Analyzer DC Bias High-Frequency LCR Meter Vector Network Analyzer VNA Frequency Response Analyzer Milliohm Meter / Battery Internal Resistance Tester
Rapid Temperature Change Thermal Flow Meter Device High/Low Temperature Platform Thermalplate Device junction temperature simulator Tj
12-bit high-definition digital oscilloscope Optically Isolated Oscilloscope System Basic Digital Oscilloscope Signal generator Digital Multimeter DMM Spectrum Analyzer Frequency counter Infrared thermal imager
Optically isolated voltage probe Optically Isolated Current Probe Dynamic On-Resistance Rds(on)dynamic Oscilloscope voltage probe High-voltage differential probe Fluxgate current transformer AC/DC Current Probe Non-inductive coaxial shunt Communication Interfaces and Cables Dedicated fixture Software
Multi-channel data acquisition instrument Data Acquisition and Playback Power Analyzer
Digital Phase-Locked Loop Amplifier Ultra-Low Noise Preamplifier Precision Current Amplifier Precision Differential Amplifier Precision Filter Light chopper Precision Low-Noise DC Power Supply
Programmable DC Power Supply DC Electronic Load Precision Bipolar Power Amplifier Bipolar simulation power supply
Safety Tester (ACI/DCI/IR/GB) High-voltage meter HV meter
Standard or calibration source meter Standard current and voltage meters

Products

Product information

Products
MICROTEST 6223/6243/6632 DC Bias Current Source Test System Frequency Response 10MHz/320A

MICROTEST 6223/6243/6632 DC Bias Current Source Test System Frequency Response 10MHz/320A

Model:6223/6243/6632      Country of Origin:China

Category:Impedance Analyzer

Overview:

MICROTEST DC bias current sources 6223 and 6243 are 20A and 40A current sources. When paired with the 6632 impedance analyzer, the frequency response reaches up to 10MHz. Up to 6 units of the 6223 can be stacked with the 6632, and up to 8 units of the 6243 can be stacked with the 6632, with maximum current output up to 320A. The 6632's standalone screen provides current sweep plotting to examine the magnetic saturation current I sat and temperature rise current I rms characteristics. By analyzing the temperature rise curve and saturation characteristics of an inductor under actual loaded current, you can immediately know whether the component will burn out due to excessive temperature. It also provides a multi-step test function, allowing different test items and measurement conditions to be edited at the same time.

Features
Specifications
Application Notes
Functions & Configuration

MICROTEST DC Bias Current Source 6223 and 6243 are 20A and 40A current sources. When paired with the 6632 Impedance Analyzer, the frequency response reaches up to 10MHz. Up to 6 units of the 6223 can be stacked with the 6632, and up to 8 units of the 6243 can be stacked with the 6632, with maximum current output up to 320A. The 6632's standalone screen provides current sweep plotting to examine the magnetic saturation current I sat and temperature rise current I rms characteristics. By analyzing the temperature rise curve and saturation characteristics of an inductor after actual current loading, you can immediately know whether the component will burn out due to excessive temperature. It also provides a multi-step test function, allowing different test items and measurement conditions to be edited at the same time.



Product Features:


  1. 6223/6243 maximum frequency response 100-10MHz

  2. Current and frequency sweep graphical analysis

  3. Temperature rise sweep function, solving the problem of DUT burnout at high temperatures

  4. DCR measurement function

  5. Continuous maximum power output over extended periods

  6. Forward and reverse current switching function

  7. Automatically adjusts according to output current: 6223 maximum output voltage 20Vdc, maximum output power 25W. Up to six units can be stacked, with maximum current up to 120AMP

  8. Automatically adjusts according to output current: 6243 maximum output voltage 12Vdc, maximum output power 50W. Up to eight units can be stacked, with maximum current up to 320AMP

  9. Enhanced breakthrough protection device

  10. Direct control via LCR Meter through Handler interface



Measurement data

 

 DC Bias Model

6223

6243

 LCR+DC Bias Frequency Response

100-10MHz

100-10MHz

 Maximum output current

120A

320A

 Output current

20A

40A

 Current accuracy (6632Standalone)

0.000A-1.000A 1%+5mA

1.001A-5.000A 2%

5.001A-20.000A 3%

 Power consumption

320W max.

640W max.

 Constant power output

●

 Positive/negative current switching

●

 Magnetic saturation current sweep

●

 Temperature rise current sweep

●

 Frequency curve sweep

●

 DC resistance measurement

●

 LCR Meter Model

 6632

 Frequency

 10-1/3/5/10/20/30/50MHz

 ACTest signal level

 10mV-2Vrms 

 DCTest signal level

 1V(Fixed)  

 Output impedance

 25Ω、100Ω (Switchable)

 Power requirements

Voltage 88-264Vac

Frequency 47-63Hz

 Interface

RS-232、Handler

 Startup mode

Auto, manual,RS-232、GPIB 、Handler

 Operating environment

Temperature:10-40℃, Humidity:20-90%RH

 Dimensions (W*H*D)

337x145x525 mm (6223)、435x132x525 mm (6243)

 Weight

15 Kg (6223)、20 Kg (6243)

 

Parameter measurement range

 

|Z|

0.000 mΩ - 9999.99 MΩ

R, X

± 0.000 mΩ - 9999.99 MΩ

|Y|

0.00000 uS - 999.999 kS

G, B

± 0.00000 uS - 999.999 kS

θRAD

± 0.00000 - 3.14159

θDEG

± 0.000° - 180.000°

Cs, Cp

± 0.00000 pF - 9999.99 F

Ls, Lp

± 0.00 nH - 9999.99 kH

D

0.00000 - 9999.99

Q

0.00 - 9999.99

Δ

± 0.00% - 9999.99%

Rdc

0.00 mΩ - 99.9999 MΩ

εr' εr''

0 - 100000

μr' μr'" 

0 - 100000

 

 

Application scope


 Magnetic components:  Power amplifier inductors, common mode chokes, inductive sensors, communication transformers, electronic transformers,PCBFlat transformers, filter inductors


Application module:  Electric vehicle onboard systems, electric vehicle turbocharging systems,DC-DCPower module


Magnetic materials:  Ferrite absorbers, alloy magnetic materials

 

 


Looking for more sales, technical and solutions information?

Contact Us >

Leave a Message

Hotline

0731-8526092618665876229

We will get back to you as soon as possible. Thank you!
(Jectronic handles your information with care. By submitting, you confirm that you have read and agree to the personal information transfer statement of this website.)

Inquiry Type: Message