Quick Contact>

Hotline

0731-85260926 18665876229

中文
Power Transistor Curve Tracer Semiconductor Parameter Analyzer SMU Source Measure Unit Dynamic Parameter Test System CV Parameter Tester Gate Charge (Qg) Tester WAT Wafer Acceptance Test System TLP Transmission Line Pulse EMMI Low-Light Infrared Fault Localization HCI/BTI/TDDB/EM effects Femtoammeter/Electrometer/High Resistance Meter High and low temperature electrical performance simulation H3TRx Customizable System Integration Software
Standard Manual Probe Station Portable Desktop Probe Station Semi-automatic probe station RF/Microwave Probe Station High/Low Temperature Probe Station Vacuum cryogenic probe station system Wafer electrical parameter test system Strong Magnetic - Hall Probe Station Custom Precision Probe Card High/Low Temperature Chuck System (Taiko) Magnetic Probe Holder CCD Microscope Test cables and adapter fixtures Shielded Box and Vibration Isolation Table Probes and other accessories
B-H Analyzer Magnetic Loss Power Tester Impedance Analyzer DC Bias High-Frequency LCR Meter Vector Network Analyzer VNA Frequency Response Analyzer Milliohm Meter / Battery Internal Resistance Tester
Rapid Temperature Change Thermal Flow Meter Device High/Low Temperature Platform Thermalplate Device junction temperature simulator Tj
12-bit high-definition digital oscilloscope Optically Isolated Oscilloscope System Basic Digital Oscilloscope Signal generator Digital Multimeter DMM Spectrum Analyzer Frequency counter Infrared thermal imager
Optically isolated voltage probe Optically Isolated Current Probe Dynamic On-Resistance Rds(on)dynamic Oscilloscope voltage probe High-voltage differential probe Fluxgate current transformer AC/DC Current Probe Non-inductive coaxial shunt Communication Interfaces and Cables Dedicated fixture Software
Multi-channel data acquisition instrument Data Acquisition and Playback Power Analyzer
Digital Phase-Locked Loop Amplifier Ultra-Low Noise Preamplifier Precision Current Amplifier Precision Differential Amplifier Precision Filter Light chopper Precision Low-Noise DC Power Supply
Programmable DC Power Supply DC Electronic Load Precision Bipolar Power Amplifier Bipolar simulation power supply
Safety Tester (ACI/DCI/IR/GB) High-voltage meter HV meter
Standard or calibration source meter Standard current and voltage meters

Products

Product information

Products
NF CA-261F2/CA-206L2 CA Series Low-Noise Differential Amplifier

NF CA-261F2/CA-206L2 CA Series Low-Noise Differential Amplifier

Model:CA-261F2/CA-206L2      Country of Origin:Japan

Category:Precision Differential Amplifier

Overview:

CA-461F2 is a low noise differential amplifier which is realized input referred noise voltage density 1.5nV/√Hz and voltage gain 100 times. The CA-461F2 is not only realized low noise but also excellent DC characteristics (0.3µV/ºC) and frequency response (DC to 200kHz) by using low noise circuit of negative feedback technology. Low noise characteristics is performed low signal source impedance(less than 500 ohm). High precision signal processing and high density mounting are possible for using 20 pin single-inline package which has 6 surface strict shield

Features
Specifications
Application Notes
Functions & Configuration

 

image.png
CA-261F2

image.png
CA-206L2

This is a high-precision, low-noise amplifier module that can be configured with only a few external components.

 

Model

Product Name

Input Type

Voltage Gain

Frequency Characteristics

Input-Referred Noise

CA-261F2

Low-Noise
Amplifier

Unbalanced/
Single-Ended Ground

40dB
±0.2dB

DC ∼
200kHz

0.8n/√Hz
(typ.)

CA-271F4

Low-Noise FET
Amplifier

Unbalanced/
Single-Ended Ground

DC ∼
10MHz

1.6n/√Hz
(typ.)

CA-461F2

Low-Noise Differential
Amplifier

Differential

DC ∼
200kHz

1.5n/√Hz
(typ.)

CA-471F4

Low-Noise FET
Differential Amplifier

Differential

DC ∼
10MHz

2.5n/√Hz
(typ.)

 

Power Supply Voltage: ±15V

Dimensions: : 67 x 10.5 x 20 (mm), 6-sided sealed, 20-pin SIP

 

Model

Product Name

Input Type

Gain

Frequency Characteristics

Frequency Bandwidth

Max.
Output Voltage

Max.. Output Current

CA-102R3

High-Speed Inverting Amplifier

According to Rin

According to the 2 external resistors (Rin, Rnf)

DC ∼ 10MHz

DC∼ 1MHz

±10V

±10

CA-206L2

Programmable Gain Amplifier

Unbalanced/Single-Ended Ground

1, 2, 5, 10,
20, 50, 100x

DC ∼ 500kHz

DC ∼ 100kHz

±5mA

CA-406L2

Differential Amplifier

Differential Amplifier
Differential

image.png  Low noise : 1.5nV/√Hz

image.png High CMRR : 100dB or greater

image.png Good DC response : 0.3µV/ºC

image.png Wide band : DC to 200kHz*

image.png High gain : x100

image.png Single in-line package with 6 surface strict shield



Absolute rating

Supply voltage(±Vs)

± 16.5V

Signal input voltage


Differential input

± 1V, ±0.7V (at power off)

Common input

±Vs,±0.7V (at power off)

Offset input voltage

± Vs

Input

Input type

DC coupling, Balanced differential input

Differential input impedance

100k ohm (typ) within 5%@DC(single ended)

Parallel capacitance 80pF(typ)

Common input impedance

500k ohm;(typ) @DC

Parallel capacitance 130pF(typ)

Linear max. differential input voltage

±100mV @1kHz

Linear max. common input voltage

±10V @1kHz

Input bias current

±30nA(typ)

Input offset current

±7nA(typ)

CMRR(input referred)

100dB or greater 120dB(typ)@60Hz

Input referred noise voltage density

1.8nV/√Hz or less @1kHz (inputshort circuit)

1.5nV/ √Hz (typ) @1kHz(input short circuit)

Input referred noise current density

2.5pA/√Hz (typ) @10kHz

Input referred offset voltage

±40µV(typ)(input short circuit)

Possible to adjust zero by external trimmerpotentiometer

Input referred DC drift

±0.3µV /ºC(typ)(input short circuit) 0 to 40ºC

Output

Output type

Unbalanced single ended output

Max output voltage

±10V @1kHz (load R ≥1k ohm)

Max output current

±10mA

Slew rate

10V/µs (typ)

Output impedance

within 50W±5% @DC

Amplifier

Voltage gain

within 40±0.2dB @1kHz

Voltage gain frequency range

DC to 200kHz within +0.5/-3dB

Harmonic distortion

0.006% (typ) @1kHz±10Voutput

Power requirements

Recommended supply voltage

±15V±1V

Consumption current

±30mA or less, ±22mA(typ)

Circumstances

Temperature and humidity range

-20 to 70ºC 10 to 90%RH

Operating Storage

-30 to 80ºC 10 to 80%RH

Outer dimensions

Outline

SS 20 type(20 pins shielded SIP)

Outer dimensions

67 x 10.5 x 20mm not including projection

Weight(NET)

Approx. 20g


Looking for more sales, technical and solutions information?

Contact Us >

Leave a Message

Hotline

0731-8526092618665876229

We will get back to you as soon as possible. Thank you!
(Jectronic handles your information with care. By submitting, you confirm that you have read and agree to the personal information transfer statement of this website.)

Inquiry Type: Message