VITREK V74 AC/DC/IR/GB Hipot Insulation Tester

The High Voltage Insulation Testing Experience Redefined

Our goal with the V7X series has always been to achieve unprecedented performance. At an entry-level price, we deliver state-of-the-art performance through a powerful yet compact multi-function high voltage insulation tester. From our easy-to-use touch user interface to the super-reliable, efficient, fanless design - the V7X delivers incomparable performance. Did we achieve our goal? You be the judge - compare the V7X with other competing products and see the advantage of American design. We build Vitrek high voltage insulation testers. What does your production line build?

Need multi-point high voltage insulation testing?

For high voltage cable and component testing - choose the 16-channel V75 with high voltage switching. With the versatile V75, you can perform high voltage insulation or IR testing on various combinations of up to 8 test points, and you can perform low resistance measurements (from .001 ohms to 60K ohms) on up to 8 conductors. With just a single touch, one compact tester automatically completes all of the above. If measurements on more than 8 points are required, the V7X can control up to 4 Vitrek 964i 64-channel high voltage switching systems - providing high voltage insulation testing capability of up to 256 channels. Simple, fast automated multi-point high voltage insulation testing - switch to Vitrek V7X. You will be very glad you did.

Features and benefits

4.3" color touchscreen - intuitive user interface;

6 selectable functions - AC/DC high-voltage insulation testing, IR, grounding impedance, continuity, and built-in switching;

Made in the USA — designed and manufactured in San Diego, California, USA;

Compact, lightweight, durable, fanless, fast (test time as short as 100ms) and accurate;

5KV AC/DC high-voltage insulation testing, source current up to 20mA;

Ground bond 1-30A RMS (42 A peak), resolution up to 100μΩ;

100nA leakage current resolution;

Low cost of ownership — 2-year calibration cycle;

Standard USB 2.0, serial/RS232, and digital I/O interfaces;

Continuously variable insulation resistance 20-5000V, up to 450GΩ;

Multi-mode IR with steady/rising pass modes;

Test memory up to 999 steps and 60 test sequences;

Internal self-test fully utilizes output and verifies current accuracy;

Pre-programmed routine verification tests with optional PVD test load;

150μS safety shutdown;

Ramp discharge capability;

Optional ARC detection 1-20mA;

Meets UL, CSA and IEC requirements for safety testers;

Certified to EN61010, CE safety mark;

2-year warranty, including parts and labor.