VITREK V60 Series Programmable Hipot/Electrical Safety Tester

Model：V60 Country of Origin：USA

Category：Safety Tester (ACI/DCI/IR/GB)

Overview：

The Vitrek V60 Series Programmable Hipot/Electrical Safety Tester The new V60 series electrical safety testers from Vitrek make it much easier to obtain a fully automatic multi-function electrical safety tester. This compact and feature-rich tester is available in three models.

Its outstanding performance:

5kV/40mA AC high-voltage insulation test;

6kV/10mA DC high-voltage insulation test;

10GΩ insulation resistance, with optional 500 & 1000 VDC output;

Ground continuity down to 0.001Ω.

Features

Specifications

Application Notes

Functions & Configuration

Unmatched Value Proposition

Vitrek's new V60 series electrical safety testers make it much simpler to obtain a fully automatic multi-function electrical safety tester.

This compact and feature-rich tester is available in three models - choose the features you need to get the job done, without paying for features you don't need. And when it comes to getting the job done, the Vitrek V60 series comes pre-loaded with standard features that help you automate your tasks. With the built-in RS232 interface, you can download and run test sequences, as well as retrieve test results and data.

If your products need these labels, be sure to use a Vitrek electrical safety tester. Because the Vitrek V60 series is designed and manufactured to meet the most stringent electrical product safety testing requirements.

At Vitrek, when we talk about the value and economy of the V60 series, we're not talking about low-end, stripped-down testers. We've pre-loaded the features you need, and at a price you absolutely can't refuse. Features include one-touch automatic testing, 160-position test memory, built-in RS232, scanner control and PLC interface, digital ramp and dwell, no-load minimum/maximum trip current setting, and full line and load regulation. These features, combined with high reliability, reduced part count, and VLSI surface-mount construction, make it very clear that the V60 series should be your next electrical safety tester. Isn't it time to put Vitrek's renowned quality and reliability to work for you?

Key Features:

Fully automatic testing with the push of a button or via RS232 & PLC controller (GPIB optional)

3 models available - choose the features you need to get the job done

QuickTest™ test automation software available

5kV/40mA AC high-voltage insulation testing

6kV/10mA DC high-voltage insulation testing

10GΩ insulation resistance, optional 500 & 1000 VDC output

Ground continuity down to 0.001Ω

Two optional 16-channel scanners

Built-in 160-step test memory

Programmable ramp and dwell times, output voltage and limits

Optional arc detection

Front panel lockout function

EN61010 certified, CE marked

AC Hipot

Voltage Range:	100 to 5000VAC RMS
Voltage Setting Resolution:	5V/step
Voltage Regulation:	1% of reading ± 5V
Voltage Accuracy:	1% of reading ± 10V
Voltage Monitoring:	At Output Terminals
Output Current:	30mA to 40mA 180S max, 10 to 30mA continuous. Below 500V 10mA max
Min/Max Current Limits:	0.1 to 40mA
Current Accuracy:	1.5% of reading ± 50mA

DC Hipot

Voltage Range:	100 to 6000VDC
Voltage Setting	Resolution: 5V/step
Voltage Regulation:	1% of reading ± 5V
Voltage Accuracy:	1% of reading ± 10V
Voltage Monitoring:	At Output Terminals
Max Output Current:	10mA continuous, below 500VDC 2mA continuous
Min/Max Current Limits:	0.1 to 10mA
Current Accuracy:	1.5% of reading ± 50mA

Ground Bond/Continuity

Test Current:	3 to 42 Amps RMS
Terminal Configuration:	4 wire Kelvin
Resistance Range:	0 to 600mW
Resistance Resolution:	100mW
Resistance Accuracy:	1% reading ± 3mΩ
Compliance Voltage:	8V at terminals
Current Resolution:	0.01A
Voltage Resolution:	0.01V

General

Test Database:	10 test sequences with up to 16 steps per test sequence
Front Panel Lockout:	Prevents database edit while in lockout mode
Arc Detect:	10 level trip select
Remote Interfaces:	Fully interactive RS232 - standard. PLC Interface with Outputs of Testing, Pass, Fail and Inputs of Start, Reset - standard. Talk/Listen GPIB interface - Option GP-V4.
Timer Accuracy:	0.25% ± 50mS
Power Source:	100, 120, 220, 230VAC (±10% 50/60Hz), 350W max
Operating Environment:	Indoor use, altitude up to 6500 ft (2000m). Installation Category II. Pollution Degree 2.
Operating Temperature:	0°C to 40°C, 80% RH
Storage Temperature:	-10°C to 70°C, 70% RH
Dimension:	17.6"L x 13"W x 5.9"H, (446mmL x 330mmW x 149mmH)
Weight:	33lbs (15kg) net, 40 lbs (18 kg) ship
Accessories	NIST Cal Cert, TL-20-60 & K-2 Test Leads, Power Cord, Serial Interface Cable & User's Manual
Accuracy:	Stated specifications apply for 1 year at 23°C ± 5°C.
Calibration:	ANSI/NCSL Z540 Certificate of Calibration with Data provided, traceable to NIST.
Compliance:	CE Mark Certified to EN61010 and EMC Directives EN50081-1 & EN50082-2.
Warranty:	* 3 Year Extended Warranty with registration and annual factory calibration. 1 year parts and labor standard.

QuickTest™ Software

Option QT-V4:

Bundled Test Automation Software and PC Serial Interface Cable. Easy to load graphical test sequence development and operating environment. Provides time/date, operator, test parameters, test results and readings. Results may be viewed, printed out or exported to a database program.

Looking for more sales, technical and solutions information?

VITREK V60 Series Programmable Hipot/Electrical Safety Tester

Leave a Message