VITREK V7X Series Economical AC/DC/IR/GB Hipot Tester

The High Voltage Insulation Testing Experience Redefined

Our goal with the V7X series has always been to achieve unprecedented performance. At an entry-level price, we deliver state-of-the-art performance through a powerful yet compact multi-function high voltage insulation tester. From our easy-to-use touch user interface to the super-reliable, efficient, fanless design - the V7X delivers unmatched performance. Did we achieve our goal? You be the judge - compare the V7X with other competing products and see the advantage of American design. We build Vitrek high voltage insulation testers. What does your production line build?

Need multi-point high voltage insulation testing?

For high voltage cable and component testing - choose the 16-channel V75 with high voltage switching. With the versatile V75, you can perform high voltage insulation or IR testing on various combinations of up to 8 test points, and you can perform low resistance measurements (from .001 ohms to 60K ohms) on up to 8 conductors. With just one touch, a single compact tester automatically performs all of the above. If measurements at more than 8 points are required, the V7X can control up to 4 Vitrek 964i 64-channel high voltage switching systems - providing high voltage insulation testing capability of up to 256 channels. Simple, fast automated multi-point high voltage insulation testing - switch to Vitrek V7X. You will be very glad you did.

Features and Benefits

4.3" color touch display - intuitive user interface for ease of use;

6 selectable functions - AC/DC high voltage insulation testing, IR, ground bond, continuity and built-in switching;

Made in the USA - designed and manufactured in San Diego, California, USA;

Compact, lightweight, durable, fanless, fast (test times as short as 100ms) and accurate;

5KV AC/DC high voltage insulation testing, source current up to 20mA;

Ground bond 1-30A RMS (42 A peak), resolution down to 100μΩ;

100nA leakage current resolution;

Low cost of ownership - 2-year calibration cycle;

Standard USB 2.0, serial/RS232, digital I/O interfaces;

Continuously variable insulation resistance 20-5000V, up to 450GΩ;

Multi-mode IR with stable/ramp pass modes;

Test memory up to 999 steps and 60 test sequences;

Internal self-test fully utilizes output and verifies current accuracy;

Pre-programmed daily verification tests with optional PVD test load;

150μS safety shutdown;

Ramp discharge capability;

Optional ARC detection 1-20mA;

Meets UL, CSA, IEC requirements for safety testers;

Certified to EN61010, CE safety mark;

2-year warranty, including parts and labor.

Features

4.3" color touch display – intuitive and easy-to-use interface

5 functions in one - AC/DC high voltage insulation, insulation resistance, ground bond, low impedance

Test record storage for up to 999 steps and 60 test programs

Made in USA – designed and built in San Diego, California

Compact, lightweight and rugged

100 nano Amp leakage current resolution

Low price — 2-year calibration interval, fan-free design

USB  2.0, Serial/RS232 and digital I/O interfaces all standard

Continuously variable insulation resistance 20-5,000V

Multi Mode IR with Steady or Rising Pass Mode

Complete self internal verification and output current accuracy

Daily pre-programmed verification test with optional PVD test load

150µS safety auto power-off

Ramp discharge function

Selectable ARC detection

Meets UL, CSA, IEC safety testing requirements

CE safety mark certified to EN61010

2-year parts and labor warranty