VITREK 95X Series Hipot Testers AC-DC-IR-GB Hipot Tester

Model： Country of Origin：

Category：Safety Tester (ACI/DCI/IR/GB)

Overview：

Power and versatility for the most demanding electrical safety testing applications

Vitrek built the 95X Series from the ground up using DSP technology to deliver the safest, fastest, most powerful and feature-rich hipot tester available. The 95X Series combines high output power, wide-range AC and DC voltage output, and extremely low leakage current measurement. We then added a 4-wire milliohm meter with a dynamic range up to 100K ohms and an overlapping teraohm-level insulation resistance function. On top of that, the available 40-amp ground bond capability means you are just beginning to see what the Vitrek 95X Series hipot tester can do for you.

Features

Specifications

Application Notes

Functions & Configuration

Faster speed, more power, better resolution, more features — what more could you want in an electrical safety tester
?
Vitrek 95X Series Hipot Tester
For 25 years, Vitrek has been obsessed with building better hipot testers. Improving user safety, shortening test times, increasing output voltage, and adding features have always been our driving forces. The 95X Series is the result of that pursuit — delivering power, speed, accuracy, and resolution that leave other products far behind.
For demanding hipot testing – demand the Vitrek 95X
Speed and power go hand in hand. The 6.5KVDC model provides 50mA of source current for DC Hipot, delivering the power needed for fast charging and discharging of challenging DUTs. Models are also available with DC hipot up to 11KV and 15KV. Most 95x series also provide 50mA of AC hipot power, but for heavier AC loads, the 95X can be configured to supply up to 100mA or even up to 200mA. For higher AC hipot, the 95X can internally generate up to 10KV, and all models offer an external 30KVAC hipot option.
When making critical leakage current measurements, the 95X provides rock-solid resolution down to 100 picoamps. This high resolution provides built-in insulation resistance (IR) measurement up to teraohms; add a 4-wire milliohm meter with up to 100K ohm auto-ranging and available 40 amp ground bond capability—and you begin to see the versatility of the Vitrek 95X series.
Need to hipot multiple test points?
The 95X can directly control up to 4 64-channel high-voltage scanners right out of the box. That equates to up to 256 test points, and using a PC with Vitrek's QuickTest Pro software, you can expand that to 640 test points. The preferred high-voltage switching system is the Vitrek 964i, which accommodates eight 8-channel switch cards — offering 7, 10, and 15 KV ratings. The 964i also has switch cards that can handle up to 40 amps of ground bond current.
Product Features and Benefits

Highest Level of Operator Safety – features include: GFI High speed shut down for earth ground leakage faults, SFI™ Safety Fault Interlock – High speed shut down output for interruption of safety interlock, TLSS™ Test Lead Safety Sense – Clamps DUT chassis near ground by continuously verifying proper connection of test leads prior to and during HV testing, Recessed start switch prevents inadvertent actuation

High Power Output – means better drive capability and increased test throughout. With up to 50mA of sourcing current for DC hipot the 95X Series gets heavy duty jobs done fast – available 100mA & 200mA AC drive tackles even the toughest sourcing requirements

Wide Range of built-in Voltage Capabilities – Choose from 6.5KVDC, 11KVDC or 15KVDC and 6KVAC, 10KVAC or up to 30KV RMS AC with external option

The Fastest Hipot Testers available – Thanks to our Dual Coldfire® microprocessors combined with Dual DSPs to provide Ramp rates up to 50KV/second, dwell times as low as 20mS and overall test times as fast as 3mS in optional Flash mode

Expansive Test Sequence Memory holds up to 100 tests with up to 100 steps per test. Tests can be selected via front panel, Ethernet, RS232, Digital I/O or with optional GPIB

Ground Bond Test Capability available in three models with output currents from 100mA to 40Amps RMS and test times from 20mS to 1000 seconds or longer

4-Wire Milli-Ohmmeter Function provides fast, accurate 5 digit resistance measurements with resolution down to 100µΩ and range up to 100K ohms

Built-in Phase Angle Measurement – allows the measurement and display of both resistive (in-phase) leakage current and reactive (out-of-phase) leakage current caused by capacitive coupling

Multi-Dwell Functionality – permits dwells at different voltage levels without having to return to zero between test steps – dramatically simplifying advanced analysis of dielectric properties

Ramp High/Dwell Low Current Limits – permits the user to set separate limits for the ramp and dwell providing faster ramp times and lower leakage test limits

Ethernet, RS232, Digital I/O, USB Printer & Scanner Control – All Standard Interfaces – Provides the highest level of test automation. GPIB optional

High Voltage Scanner Control – up to 256 point switching capability with available 964i HV Scanners. Route voltages up to 15KV and currents up to 40A for multi-point hipot and ground bond tests

Dual Dimensional / Test Specific / Broadband Arc Detection. Where lesser testers allow you to set a single, global, amplitude only arc limit – the technologically advanced 95X Series utilizes time & amplitude based arc limits and uniquely applies them to each desired test

Pico-Amp Leakage Measurement insures that even the lowest leakage current levels are accurately detected and tera-ohm range IR readings are stable and precise

Test Specific Fixture & Cable Compensation – Automatically calibrate out offset errors caused by lead resistance, fixture capacitance and leakage

Multi-Mode IR – Insulation Resistance values up to one Tera-ohm can be obtained with precision in your choice of 3 IR test modes – end on time, end on pass or end on fail

Continuously Variable IR Test Voltage – Unlike most IR testers which limit you to 3 or 4 discrete test voltages, the 950i Series allows you to select the test voltage you need. Starting as low as 20V all the way to 6.5KV, 11KV or 15KVDC

Capacitance Test Modes – For AC & DC hipot and IR provide tightly controlled charge and discharge profiles for superior results on critical solar panel tests and other highly capacitive loads

Light Weight Switching Power Supply Design – Better reliability, easier on your back. Compare the 8.2 kg 95X to whatever you’ve been using

400Hz AC Voltage Withstand Testing provides aviation frequency specific test results for a more effective analysis of dielectric properties on avionic components

Solar Panel Testing Simplified – Designed with PV testing in mind, the 950i Series uses pico-amp resolution to detect minute defects in solar cells

3 Year Extended Warranty – 1 year standard, total of 3 years extended warranty with registration and annual factory calibration. Built-in reliability you can count on for years to come

Safety Tested per EN 61010-1. EMC compliant to EN 61326-1

Capabilities	951i	952i	953i	954i	955i	957i	959i
AC Hipot (Max Std Current) (500VA Option) (2KV Max Option) (30KVAC Ext. opt)	20V-6KV 50mA 100mA 200mA 10mA	20V-6KV 50mA – 200mA 10mA	20V-6KV 50mA 100mA 200mA 10mA	20V-6KV 50mA – 200mA 10mA	50V-10KV 30mA – – 10mA	20V-6KV 50mA 100mA 200mA 10mA	– – – – –
DC Hipot / IR (Max Current) (Max IR)	30V-6.5KV 50mA 4T	30V-6.5KV 50mA 4T	50V-11KV 30mA 8T	50V-11KV 30mA 8T	50V-11KV 30mA 8T	100V-15KV 10mA 10T	– – –
40A Ground Bond	–	Yes	–	Yes	–	–	Yes
4 Wire Ohmmeter 100µΩ to 149KΩ	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Looking for more sales, technical and solutions information?

VITREK 95X Series Hipot Testers AC-DC-IR-GB Hipot Tester

Power and versatility for the most demanding electrical safety testing applications

Faster speed, more power, better resolution, more features — what more could you want in an electrical safety tester?

For demanding hipot testing – demand the Vitrek 95X

Need to hipot multiple test points?

Product Features and Benefits

Leave a Message

Faster speed, more power, better resolution, more features — what more could you want in an electrical safety tester
?