IWATSU HV-P60A/HV-P30A 30KV and 60KV High-Frequency Extra-High-Voltage Probe Iwatsu Japan

Model：HV-P60A/HV-P30A Country of Origin：Japan

Category：Oscilloscope voltage probe

Overview：

A high-voltage probe capable of measuring 60 kV/30 kV RMS high-frequency voltage signals, with pulse measurement up to 80 kV.

Features

Specifications

Application Notes

Functions & Configuration

HV-P60A

High-voltage Probe HV-P60A

HV-P60A

High-voltage waveforms of up to DC 60 kV, pulse 80 kV measured by oscilloscope

Wide bandwidth, DC to 50 MHz

Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage

Specifications
Maximum input voltage	DC 60 kV or AC peak* Single-shot pulse of 80 kV, standard pulse wave
Bandwidth	DC to 50 MHz, within -3 dB
Rise time	7 ns or less (for probes only)
Input RC	1,000 MW ±5% //5 pF ±2 pF
Attenuation	2000:1 ±5%
Cable length	Approx. 4 m
Connector	BNC type
Used for	Oscilloscope with input RC: 1 MW, 10 to 40 pF
Weight	Approx. 3.2 kg (including accessories)
Accessories	Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag
Options	High-voltage probe stand SK-301 (produced upon order) The SK-301 can be used with both the HV-P60A/60 and the HV-P30A/30. It is attached by turning the probe bracket upside down (for HV-P60A/HV-P60/HV-P30A/HV-P30).
* The P-P voltage drops if the CW is 100 kHz or greater.

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1.

Characteristic curve

Maximum Input Voltage and Frequency (Sine Wave) [HV-P60A]

High-voltage Probe HV-P30A

HV-P30A

	High-voltage waveforms of up to DC 30 kV, pulse 40 kV measured by oscilloscope

	Wide bandwidth, DC to 50 MHz

	Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage

Specifications
Maximum input voltage	DC 30 kV or DC + AC peak* Single-shot pulse of 40 kV, repetitive signal
Bandwidth	DC to 50 MHz, within -3dB
Rise time	7 ns or less
Input RC	100 MW ±5% //7 pF or less
Attenuation	1000:1 ±5%
Cable length	Approx. 3 m
Connector	BNC type
Used for	Oscilloscope with input RC: 1 MW, 10 to 40 pF
Weight	Approx. 2.5 kg (including accessories)
Accessories	Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag
Options	High-voltage probe stand SK-301 (produced upon order) The SK-301 can be used with both the HV-P60A/60 and the HV-P30A/30. It is attached by turning the probe bracket upside down (for HV-P60A/HV-P60/HV-P30A/HV-P30).
* The P-P voltage drops if the CW is 100 kHz or greater.

Characteristic curve

Maximum Input Voltage and Frequency (Sine Wave) [HV-P30A]

Dimensions

Looking for more sales, technical and solutions information?

IWATSU HV-P60A/HV-P30A 30KV and 60KV High-Frequency Extra-High-Voltage Probe Iwatsu Japan

HV-P60A

High-voltage Probe HV-P60A

High-voltage Probe HV-P30A

Leave a Message