Quick Contact>

Hotline

0731-85260926 18665876229

中文
Power Transistor Curve Tracer Semiconductor Parameter Analyzer SMU Source Measure Unit Dynamic Parameter Test System CV Parameter Tester Gate Charge (Qg) Tester WAT Wafer Acceptance Test System TLP Transmission Line Pulse EMMI Low-Light Infrared Fault Localization HCI/BTI/TDDB/EM effects Femtoammeter/Electrometer/High Resistance Meter High and low temperature electrical performance simulation H3TRx Customizable System Integration Software
Standard Manual Probe Station Portable Desktop Probe Station Semi-automatic probe station RF/Microwave Probe Station High/Low Temperature Probe Station Vacuum cryogenic probe station system Wafer electrical parameter test system Strong Magnetic - Hall Probe Station Custom Precision Probe Card High/Low Temperature Chuck System (Taiko) Magnetic Probe Holder CCD Microscope Test cables and adapter fixtures Shielded Box and Vibration Isolation Table Probes and other accessories
B-H Analyzer Magnetic Loss Power Tester Impedance Analyzer DC Bias High-Frequency LCR Meter Vector Network Analyzer VNA Frequency Response Analyzer Milliohm Meter / Battery Internal Resistance Tester
Rapid Temperature Change Thermal Flow Meter Device High/Low Temperature Platform Thermalplate Device junction temperature simulator Tj
12-bit high-definition digital oscilloscope Optically Isolated Oscilloscope System Basic Digital Oscilloscope Signal generator Digital Multimeter DMM Spectrum Analyzer Frequency counter Infrared thermal imager
Optically isolated voltage probe Optically Isolated Current Probe Dynamic On-Resistance Rds(on)dynamic Oscilloscope voltage probe High-voltage differential probe Fluxgate current transformer AC/DC Current Probe Non-inductive coaxial shunt Communication Interfaces and Cables Dedicated fixture Software
Multi-channel data acquisition instrument Data Acquisition and Playback Power Analyzer
Digital Phase-Locked Loop Amplifier Ultra-Low Noise Preamplifier Precision Current Amplifier Precision Differential Amplifier Precision Filter Light chopper Precision Low-Noise DC Power Supply
Programmable DC Power Supply DC Electronic Load Precision Bipolar Power Amplifier Bipolar simulation power supply
Safety Tester (ACI/DCI/IR/GB) High-voltage meter HV meter
Standard or calibration source meter Standard current and voltage meters

Products

Product information

Products
PMK Tetris 1GHZ-2.5GHZ High-Impedance High-Frequency FET Probe Replaces LeCroy ZS

PMK Tetris 1GHZ-2.5GHZ High-Impedance High-Frequency FET Probe Replaces LeCroy ZS

Model:Tetris®1000/1500/2500      Country of Origin:Germany

Category:High-voltage differential probe

Overview:

High-frequency, high-impedance FET active voltage probe, particularly suitable for RF electrical signal measurement

Features
Specifications
Application Notes
Functions & Configuration

TETRIS® Active Probe 

■ 1 MΩ / 0.9 pF
■ Exchangeable Spring Tip
■ Contacts Adjacent Pins 
  in 2.54 mm pitch
■ System-independent at
  50 Ω input


13.jpg


Inline-Probing-System:
PMK presents a unique inline probing system – the TETRIS® Active Probe which can contact adjacent square pins in 2.54 mm pitch simultaneously. The probe‘s housing is T-shaped so that many probes can be

positioned next to each other in a never ending chain.
Like this a number of measurements can be performed at the same time.

TETRIS®  is system-independent and its standard BNC connector can be plugged into any measuring

instrument having 50 Ω input.



⋄ Input Voltage:   20V

⋄ Input Coupling:  50 Ω AC/DC

⋄ Cable Length:   1.3 m (*)


→ Tetris Probe Accessories


Models & Specifications

Order number

Article

Attenuation

Bandwidth (-3 dB)

Input Impedance

Dynamic Range

881-000-000

Tetris® 1000

10:1

1.0 GHz / 600 MHz (**)

1 MΩ / 0.9 pF

± 8 V

881-000-INT

Tetris® 1000

10:1

1.0 GHz / 600 MHz (**)

1 MΩ / 0.9 pF

± 8 V

881-500-000

Tetris® 1500

10:1

1.5 GHz / 1 GHz (***)

1 MΩ / 0.9 pF

± 8 V

881-500-INT

Tetris® 1500

10:1

1.5 GHz / 1 GHz (***)

1 MΩ / 0.9 pF

± 8 V

882-500-000

Tetris® 2500

10:1

2.5 GHz / 2 GHz (****)

1 MΩ / 0.9 pF

± 8 V

882-500-INT

Tetris® 2500

10:1

2.5 GHz / 2 GHz (****)

1 MΩ / 0.9 pF

± 8 V

Power Supplies

Tetris® active probes are delivered with wide-range power supplies PS-01, featuring an EU mains adapter, by default. For the international version, including adaptors for US, UK and AUS, please submit one of the following order numbers.



Tetris® 1000    881-000-INT

Tetris® 1500    881-500-INT

Tetris® 2500    882-500-INT


(*) other cable lengths on request

(**) at ≥ 500 MHz Oscilloscope
(***) at ≥ 1 GHz Oscilloscope
(****) at ≥ 2 GHz Oscilloscope


Looking for more sales, technical and solutions information?

Contact Us >

Leave a Message

Hotline

0731-8526092618665876229

We will get back to you as soon as possible. Thank you!
(Jectronic handles your information with care. By submitting, you confirm that you have read and agree to the personal information transfer statement of this website.)

Inquiry Type: Message