Quick Contact>

Hotline

0731-85260926 18665876229

中文
Power Transistor Curve Tracer Semiconductor Parameter Analyzer SMU Source Measure Unit Dynamic Parameter Test System CV Parameter Tester Gate Charge (Qg) Tester WAT Wafer Acceptance Test System TLP Transmission Line Pulse EMMI Low-Light Infrared Fault Localization HCI/BTI/TDDB/EM effects Femtoammeter/Electrometer/High Resistance Meter High and low temperature electrical performance simulation H3TRx Customizable System Integration Software
Standard Manual Probe Station Portable Desktop Probe Station Semi-automatic probe station RF/Microwave Probe Station High/Low Temperature Probe Station Vacuum cryogenic probe station system Wafer electrical parameter test system Strong Magnetic - Hall Probe Station Custom Precision Probe Card High/Low Temperature Chuck System (Taiko) Magnetic Probe Holder CCD Microscope Test cables and adapter fixtures Shielded Box and Vibration Isolation Table Probes and other accessories
B-H Analyzer Magnetic Loss Power Tester Impedance Analyzer DC Bias High-Frequency LCR Meter Vector Network Analyzer VNA Frequency Response Analyzer Milliohm Meter / Battery Internal Resistance Tester
Rapid Temperature Change Thermal Flow Meter Device High/Low Temperature Platform Thermalplate Device junction temperature simulator Tj
12-bit high-definition digital oscilloscope Optically Isolated Oscilloscope System Basic Digital Oscilloscope Signal generator Digital Multimeter DMM Spectrum Analyzer Frequency counter Infrared thermal imager
Optically isolated voltage probe Optically Isolated Current Probe Dynamic On-Resistance Rds(on)dynamic Oscilloscope voltage probe High-voltage differential probe Fluxgate current transformer AC/DC Current Probe Non-inductive coaxial shunt Communication Interfaces and Cables Dedicated fixture Software
Multi-channel data acquisition instrument Data Acquisition and Playback Power Analyzer
Digital Phase-Locked Loop Amplifier Ultra-Low Noise Preamplifier Precision Current Amplifier Precision Differential Amplifier Precision Filter Light chopper Precision Low-Noise DC Power Supply
Programmable DC Power Supply DC Electronic Load Precision Bipolar Power Amplifier Bipolar simulation power supply
Safety Tester (ACI/DCI/IR/GB) High-voltage meter HV meter
Standard or calibration source meter Standard current and voltage meters

Products

Product information

Products
Cybertek DP6020 (20V/200MHz) Low Voltage Differential Probe Zhiyong

Cybertek DP6020 (20V/200MHz) Low Voltage Differential Probe Zhiyong

Model:DP6020      Country of Origin:China

Category:High-voltage differential probe

Overview:

DP6020 Probe is a low-voltage differential probe with floating measurement capability.

Measurement voltage ±20V(DC+Pk)

Its bandwidth reaches up to 200MHz

Features
Specifications
Application Notes
Functions & Configuration

DP6020 Probe is a low-voltage differential probe with floating measurement capability.

Measurement voltage ±20V(DC+Pk), with bandwidth up to 200MHz, providing a 10:1 attenuation setting,

with a 1 MΩ input impedance and a low input capacitance of 3.5 pF  , which minimizes circuit loading,

features an overvoltage alarm function, is compatible with any oscilloscope having a 50 Ω BNC input, and can be powered via the USB port on the oscilloscope or computer.

It is widely used in various applications, providing excellent general-purpose differential signal measurement for today's high-speed power measurements, automotive bus measurements, and digital system designs.


Bandwidth(-3dB)

200MHz (refer to Figure 1 frequency response curve)

Rise time

≤1.75ns

Accuracy (% of reading)

±2%

Attenuation ratio

10:1

Maximum differential measurement voltage (DC + Peak AC)

±20V

Maximum common-mode input voltage

±60V

Maximum rated input voltage (each terminal to ground)

±60V

Input impedance

Single-ended to ground

500kΩ

Two Input Terminals

1MΩ

Input capacitance

Single-ended to ground

<7pF

Two Input Terminals

<3.5pF

Output voltage swing

±2V (driving 50Ω oscilloscope input)

Offset (typical value)

±2mV

Offset Adjustment Range (Typical Value)

±95mV

CMRR

50Hz/60Hz

>80dB

10MHz

>50dB

Noise (Vrms)

6mV

Overload indication voltage threshold

≥20V

Delay time

Probe main unit

11ns

BNC cable (1m)

5ns

Overload indicator light

When overloaded, the indicator light turns red

Terminal load requirements

50Ω

Power supply

USB 5V/1A adapter

             
Figure 1: Frequency response curve



Looking for more sales, technical and solutions information?

Contact Us >

Leave a Message

Hotline

0731-8526092618665876229

We will get back to you as soon as possible. Thank you!
(Jectronic handles your information with care. By submitting, you confirm that you have read and agree to the personal information transfer statement of this website.)

Inquiry Type: Message