HIOKI 8860-50/ 8861-50 Hioki Memory Recorder Oscilloscope

Model：8860-50/ 8861-50 Country of Origin：USA

Category：Data Acquisition and Playback

Overview：

As an oscilloscope and as a data logger, it is suitable for data acquisition and recording in various situations.

Features

Specifications

Application Notes

Functions & Configuration

●Operating speed increased 3 times compared to previous models

●Maximum 64-channel/128-channel multi-channel data acquisition (using 8958 scanning unit)

●20MS/s high-speed sampling readout

●Equipped with various interfaces such as LAN/USB/PC card slot

●A rich lineup of input units for temperature, FFT, strain, F/V, charge, etc.

The 8860-50 and 8861-50 main units alone cannot be used; please install separately sold input units in the main unit and use them together.
*In any case, one type of memory expansion board is required. For the 8861-50, two of the same type are required; please specify when ordering.

Model	8860-50	8861-50
Unit	Maximum 4 units	Maximum 8 units
Number of input channels	16 analog channels + 16 logic channels 64 analog channels + 16 logic channels (using 8958)	32 analog channels + 16 logic channels 128 analog channels + 16 logic channels (using 8958)
Measurement range (20 divisions f.s.)	5mV to 20V/division, 12 range settings (using 8956) Resolution: 1/100 of range	5mV to 20V/division, 12 range settings (using 8956) Resolution: 1/100 of range
Maximum input voltage	DC 400V (when using 8956)	DC 400V (when using 8956)
Frequency characteristics	DC to 10MHz (when using 8956)	DC to 10MHz (when using 8956)
Power supply	AC 100～240V, 50/60Hz (maximum 220VA when not using the print unit) DC 12V system (when 9684 is installed)	AC 100～240V, 50/60Hz (maximum 280VA when not using the print unit) DC 12V system (when 9684 is installed)
Dimensions and weight	330W × 250H × 184.5Dmm 8kg (when not using the print unit)	330W × 250H × 284.5Dmm 10.5kg (when not using the print unit)
Time axis of the storage function (when using the storage function)	5μs ～5 minutes/div, 26 range settings, Sampling speed: Fixed: 1/100 of the time axis range, Arbitrary: External sampling; the time axis can be set by the sampling period; sampling speeds for 2 systems can be set
Measurement functions	Storage (high-speed recording), Recording (real-time recording), Storage and recording (real-time recording + high-speed recording), FFT (frequency analysis), Real-time save function (can save data to media in real time)
Memory capacity	Analog 12bit × 32MW/ch (1ch on 8860-50, 2ch on 8861-50) to 2MW/ch (16ch on 8860-50, 32ch on 8861-50) *Expandable up to 32 times. (using optional memory expansion board)
Storage media	PC card TYPE II slot × 2 (standard), hard disk (memory option)
Recording paper	[Print unit - option]: A4: 216mm×30m or A6: 112mm×18m, roll thermal paper, recording speed: maximum 25mm/sec
Display	10.4-inch TFT color LCD (SVGA, 800×600 dots)
Interface	GP-IB (PC card), USB2.0 (standard socket A), LAN (HTTP/FTP/send, etc.), external display output (15-pin D-sub, SVGA output)
Accessories	Power cord × 1, ground adapter × 1, input wire labels × 1, Waveform viewing software ( Wv+ communication command table ×1)

Looking for more sales, technical and solutions information?

HIOKI 8860-50/ 8861-50 Hioki Memory Recorder Oscilloscope

Leave a Message