Achieve ultra-low temperatures without liquid nitrogen (LN2) or liquid carbon dioxide (LCO2)

Frost-free operation

Dry air purge at the tester interface to prevent condensation: 0.5 to 3 scfm (0.25 to 1.5 l/s)

Eco-friendly features

Automatic power saving: reduces power consumption during idle periods

Heat-only mode: reduces power consumption when cryogenic cooling is not in use

Heated defrost function

Quickly removes moisture accumulated in the internal chiller

Fully adjustable system:

✳Embedded control system

✳Local and remote operation

✳On-screen help

✳User-defined temperature limits

✳Customizable and savable test setups

✳Equipped with Ethernet, IEEE-488, RS232, and USB serial ports

✳Program and data logger storage (via Ethernet or USB)

Performance:

Temperature control range (No LN2  or LCO2  Required): 

-75 to +225°C (50Hz)

-80 to +225°C (60Hz)

Heating and cooling rate

-55 to +125°C, within approximately 10s

125 to -55°C, within approximately 10s

System airflow output

4 to 18 scfm (1.9 to 8.5 l/s) continuous

Temperature control:

Temperature display and resolution:

+/-0.1°C temperature accuracy 1.0°C (when calibrated to NIST standards)

DUT temperature control:

Proprietary control algorithm enables direct control of DUT temperature

DUT sensor ports:

Built-in diode, thermocouple (T & K), RTD (100 Ohm platinum)

Application options:

Thermal Cap or FlexExtender Hose：

 4.5 or 5.5 inch ID Thermal Cap or  optional FlexExtender Hose for  connection to external Thermal  Chambers or enclosures .

MobileTemp™ ：

Thermal Chambers Temperature Chambers designed  specifically for uses with ATS  THERMOSTREAM® Systems. See  Additional Datasheets for details.

E-series systems are equipped with embedded software control and do not require a Windows® operating system·

Significantly reduce security vulnerabilities·Reduce software and hardware obsolescence issues·Improve touchscreen responsiveness·Faster system startup and boot times

Frost-free function

Dry air purge at the tester interface to prevent condensation: 0.5 to 3 scfm (0.25 to 1.5 l/s)

ECO-friendly features

Auto energy saving: reduces power consumption during idle periods

Heat-only mode: reduce power consumption when low temperatures are not required

Heated defrost function

Quickly removes moisture accumulated in the internal chiller

Fully adjustable system:

✳Embedded control system

✳Local and remote operation

✳On-screen help

✳User-defined temperature limits

✳Customizable and savable test settings

✳Equipped with Ethernet, IEEE-488, RS232, USB serial ports

✳Program and data logger storage (via Ethernet or USB)