Intest Thermal Temptronic ATS-545-M Thermal Test Temperature Control System

Achieves ultra-low temperatures without liquid nitrogen (LN2) or liquid carbon dioxide (LCO2)

Frost-free operation

Dry air purge at the tester interface prevents condensation: 0.5 to 3 scfm (0.25 to 1.5 l/s)

Eco-friendly features

Heat-only mode: reduces power consumption when not using low temperatures

Heated defrost function

Quickly removes moisture accumulated in the internal chiller

Fully adjustable system:

✳ Embedded control system

✳ Local and remote operation

✳ LabView control

✳ Program and data log storage

✳ Customizable and savable test setups

✳ Equipped with Ethernet, IEEE-488, RS232, and USB serial ports

✳ User-defined temperature limits

Performance:

Temperature control range (No LN2  or LCO2  Required): 

-75 to +225°C (50Hz)

-80 to +225°C (60Hz)

Heating and cooling rate

-55 to +125°C, within approximately 10s

125 to -55°C, within approximately 10s

System airflow output

4 to 18 scfm (1.9 to 8.5 l/s) continuous

Temperature control:

Temperature display and resolution:

+/-0.1°C temperature accuracy 1.0°C (when calibrated to NIST standards)

DUT temperature control:

Proprietary control algorithm enables direct control of DUT temperature

DUT sensor ports:

Built-in diode, thermocouple (T & K)

APPLICATION OPTIONS: 

Thermal Cap or FlexExtender Hose 4.5 or 5.5 inch ID Thermal Cap or optional FlexExtender Hose for connection  to external Thermal Chambers or enclosures 

MobileTemp™ Thermal Chambers Temperature Chambers designed specifically for uses with ATS  THERMOSTREAM® Systems. See Additional Datasheets for details

Frost-free function

Dry air purge at the tester interface to prevent condensation: 0.5 to 3 scfm (0.25 to 1.5 l/s)

ECO-friendly features

Auto energy saving: reduces power consumption during idle periods

Heat-only mode: reduce power consumption when low temperatures are not required

Heated defrost function

Quickly removes moisture accumulated in the internal chiller

Fully adjustable system:

✳LabView control system

✳Local and remote operation

✳User-defined temperature limits

✳Customizable and savable test settings

✳Equipped with Ethernet, IEEE-488, RS232, USB serial ports

✳Program and data logger storage