Quick Contact>

Hotline

0731-85260926 18665876229

中文
Power Transistor Curve Tracer Semiconductor Parameter Analyzer SMU Source Measure Unit Dynamic Parameter Test System CV Parameter Tester Gate Charge (Qg) Tester WAT Wafer Acceptance Test System TLP Transmission Line Pulse EMMI Low-Light Infrared Fault Localization HCI/BTI/TDDB/EM effects Femtoammeter/Electrometer/High Resistance Meter High and low temperature electrical performance simulation H3TRx Customizable System Integration Software
Standard Manual Probe Station Portable Desktop Probe Station Semi-automatic probe station RF/Microwave Probe Station High/Low Temperature Probe Station Vacuum cryogenic probe station system Wafer electrical parameter test system Strong Magnetic - Hall Probe Station Custom Precision Probe Card High/Low Temperature Chuck System (Taiko) Magnetic Probe Holder CCD Microscope Test cables and adapter fixtures Shielded Box and Vibration Isolation Table Probes and other accessories
B-H Analyzer Magnetic Loss Power Tester Impedance Analyzer DC Bias High-Frequency LCR Meter Vector Network Analyzer VNA Frequency Response Analyzer Milliohm Meter / Battery Internal Resistance Tester
Rapid Temperature Change Thermal Flow Meter Device High/Low Temperature Platform Thermalplate Device junction temperature simulator Tj
12-bit high-definition digital oscilloscope Optically Isolated Oscilloscope System Basic Digital Oscilloscope Signal generator Digital Multimeter DMM Spectrum Analyzer Frequency counter Infrared thermal imager
Optically isolated voltage probe Optically Isolated Current Probe Dynamic On-Resistance Rds(on)dynamic Oscilloscope voltage probe High-voltage differential probe Fluxgate current transformer AC/DC Current Probe Non-inductive coaxial shunt Communication Interfaces and Cables Dedicated fixture Software
Multi-channel data acquisition instrument Data Acquisition and Playback Power Analyzer
Digital Phase-Locked Loop Amplifier Ultra-Low Noise Preamplifier Precision Current Amplifier Precision Differential Amplifier Precision Filter Light chopper Precision Low-Noise DC Power Supply
Programmable DC Power Supply DC Electronic Load Precision Bipolar Power Amplifier Bipolar simulation power supply
Safety Tester (ACI/DCI/IR/GB) High-voltage meter HV meter
Standard or calibration source meter Standard current and voltage meters

Products

Product information

Products
IWATSU DS-5612A/5622A/5632A/5652A 12bit Digital Oscilloscope Japan IWATSU

IWATSU DS-5612A/5622A/5632A/5652A 12bit Digital Oscilloscope Japan IWATSU

Model:DS-5612/5622/5632/5652      Country of Origin:Japan

Category:Basic Digital Oscilloscope

Overview:

IWATSU Observing signal waveforms is the most important function of an oscilloscope.
Built on our long-standing expertise in analog oscilloscope engineering, the ViewGo is crafted with first-class design.

Features
Specifications
Application Notes
Functions & Configuration

Digital Oscilloscope DS-5600 Series | Top

 

I.The New ViewGo II Delivers Outstanding Performance

  

image.png 

High-Speed Waveform Data Transfer [approx. 100x faster (vs. current IWATSU models)] 

Touchscreen Operation 

Japanese Quality  

 

image.pngDS-5600 Series


II.DS-5600 Series  5 Key Features

 Observing signal waveforms is the most important function of an oscilloscope

Backed by our long-standing expertise in analog oscilloscope engineering, the ViewGo is precision-built using first-class design and craftsmanship


image.pngHigh-Speed Waveform Data Transfer

Waveform transfer speed increased by approximately 100 times (compared with existing IWATSU models)
High-speed transfer shortens per-unit processing time, helping to boost productivity


image.pngFirst in its class to adopt a touchscreen

Operated via a 7.5-inch LCD touchscreen.
Touchscreen menu design for intuitive operation
Durable glass touchscreen with excellent environmental resistance


image.pngIndependent operation keys and knobs on every channel

Independent key and knob design for simple, comfortable operation


image.png1 Mpoint memory length per channel

With up to 1 Mpoint of memory per channel, high-quality waveforms can be captured over extended periods at higher sample rates


image.pngVersatile Trigger Functions

Versatile trigger functions provide optimal triggering for every type of signal

 

[Edge ALT] triggerEnables alternating triggering on rising and falling edges

[Edge OR] triggerEnables edge triggering on signals from multiple channels

Pattern triggerEnables triggering on complex logic signal patterns

[Dropout] triggerEnables triggering on signal loss and similar events

 

 

III.Practical Functions

 ●Remote Control

The ViewGo II can connect to a PC for remote control. It supports USB (standard), LAN (standard), and GP-IB (factory option) interfaces, and the following software extends analysis capabilities.

image.png 



●Scope Viewer
This software makes it easy to capture data from the ViewGo II and provides simple remote control over USB or LAN.

image.png 

 

 

 


Parameters

DS-5614

DS-5612

DS-5624

DS-5622

DS-5634

DS-5632

DS-5654

DS-5652

Frequency bandwidth (-3dB)

100MHz

200MHz

350MHz

500MHz

Rise time (typical)

3.5ns

1.75ns

1ns

750ps

Input channels

4

2

4

2

4

2

4

2

Maximum sampling rate

1GS/s

1GS/s (each channel) / 2GS/s (half channel)

Equivalent sampling

100GS/s

Peak detection period

1ns

Average

2 to 256 times

Maximum memory length

1Mpts/each channel

Voltage resolution

8-bit

Input voltage

Range

2mV/div - 10V/div(1Mohm)

2mV/div - 10V/div(1Mohm)、2mV/div - 2V/div(50ohm)

Offset:

DC accuracy

2mV/div - 50mV/div:+/-1V,50.2mV/div - 500mV/div:+/-10V,502mV/div - 10V/div:+/-100V

Maximum input voltage

+/-400Vpeak CAT I( 1Mohm)

+/-400Vpeak CAT (1Mohm), 5Vrms( 50ohm)

Frequency bandwidth limit

20MHz

20MHz,100MHz

Input coupling

GND, DC 1Mohm, AC 1Mohm

GND, DC 1Mohm, AC 1Mohm, DC 50ohm

Input impedance

1Mohm +/-1.5% // 20pF

1Mohm +/-1.5% // 16pF,50ohm +/-1.5%

Probe sensor

Auto - 1:1, 10:1, 100:1, 1000:1,

Manual - 1:1, 5:1, 10:1, 20:1, 50:1, 100:1, 200:1, 500:1, 1000:1, 2000:1

Probe (one per channel)

SS-0130R

SS-101R

Time base range

5ns/div - 50s/div

2ns/div - 50s/div

1ns/div - 50s/div

500ps/div - 50s/div

Roll mode time base range

50ms/div - 50s/div (100kS/s, maximum)

Time base stability

10ppm

Trigger functions

Edge, edge ALT, edge OR, pulse count, pulse width, period, dropout, voltage difference, TV, pattern (OR, NOR, AND, NAND)

Trigger
System

TV mode

NTSC, PAL, Custom

Select line number /
Field select

Up to 3000 / 1, 2, 4, 8 fields

Pulse count

Trigger

1 to 9999 events

Pulse width trigger

15ns to 50s

Period trigger

40ns to 50s

Dropout trigger

50ns to 50s

Logic trigger

OR、NOR、AND、NAND

Trigger source / Status

Input channel / high, low, don't care

Trigger threshold level setting

Each channel can be set independently

Trigger source

Input channels, line, EXT (+/-0.5V), EXT10 (+/-5.0V)

Trigger coupling

AC, DC, high-frequency rejection, low-frequency rejection, noise rejection

Screen display

7.5-inch color TFT-LCD touch screen / VGA (640*480 pixels)

Display mode

Y-T, XY, XY (triggered)

Vector display method

Interpolate sampling points

Analog persistence mode

Monochrome grayscale or color palette

Persistence time setting

100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, infinite

Reference waveform memory

5 waveforms

Panel setting memory

Internal memory (5 settings), USB memory

Parameter measurement

Max, Min, peak-to-peak, RMS, cycle RMS, average

Cycle Mean, Crest, Trough, Crest - Trough, +Overshoot, -Overshoot,

Tr 20-80%, Tf 80-20%, Tr 10-90%, Tf 90-10%, frequency, period,

+pulse count, -pulse count, +pulse width, -pulse width, duty cycle,

Integral, Offset (+, -), Offset @ Level

Cursor

Time, Amplitude, Time and Amplitude, Cursor values

Scaling

Zoom key enables display of each grid area

Math

+, -, x, FFT (up to 8k points, rectangular, VonHann, flat top)

Reset / Unit conversion

a*x+b (x: user-defined input voltage a and b) / volts,

Amps, watts, degrees Celsius, unitless

Replay

Automatically records up to 2048 waveforms, historical waveforms can be replayed

Frequency counter

6 digits

Interface

USB 2.0 (host and device), 10/100-BaseTX LAN,

IEEE488.2 GPIB (factory option: DS-576)

Multilingual help

English, Simplified Chinese, Japanese

Auxiliary interface

Auxiliary connector for external accessories

EXT output (option)

CH1&CH2 output: DS-577, CH1&TRIG output: DS-578

Waveform data storage

USB memory, supports binary, ASCII, Mathcad,

Calculation (ASCII), Calculation (Mathcad)

Hard copy output

Output to USB memory, supports TIFF, BMP, PNG formats

Or output to a PictBridge printer

AC input voltage, frequency,
Power consumption

90 to 264V AC (50Hz/60Hz),

90 to 132V AC (50Hz/60Hz/400Hz), 95VA (60W) (max)

Dimensions / Body weight

330(W)*190(H)*124(L) mm / 3.7kg

Guaranteed performance temperature

+10deg. to +35deg. (Celsius)

Guaranteed operating temperature and humidity / Altitude conditions

0deg. to +40deg., 5 to 80% (RH<=30deg.),

55%RH or less (40deg.) (condensation) / 2000 m or more

Storage temperature

-20deg. to +60deg. (Celsius)


Looking for more sales, technical and solutions information?

Contact Us >

Leave a Message

Hotline

0731-8526092618665876229

We will get back to you as soon as possible. Thank you!
(Jectronic handles your information with care. By submitting, you confirm that you have read and agree to the personal information transfer statement of this website.)

Inquiry Type: Message