IWATSU SY-8232/SY8258 岩崎软磁性材料交流BH饱和BS及损耗分析仪-停产

产品型号：SY-8232/8258 原产地：日本

所属类别：B-H分析仪

产品简介：

说明：此机型停产，规格机型为SY-8218 （高频10MHZ)及SY-8219 (1MHZ)

The SY-8232 high-frequency B-H analyzer is the flagship of IWATSU’s line of B-H analyzers. It has a high-frequency B-H curve tracing capability over an ultrawide-range measurement frequency from 10 Hz (optionally 1 Hz) to 10 MHz.

资料下载

IWATSU SY-8258 B-H 分析仪规格书

IWATSU SY-8232型B-H 分析仪规格书

产品特点

产品参数

应用说明

功能配置

Features:

Ultrawide measurement frequency

bandwidth
-The frequency range for measurement is exceptionally wide, from 10 Hz (optionally 1 Hz) to 10 MHz.

Desktop size, all-in-one construction
-A compact design incorporating an oscillation circuit, power amplifier circuit, high-speed digitizer, operation control circuit and printer. Magnetic head material can be directly measured by the built-in power amplifier (25 VA) for excitation. (An optional external power
amplifier can also be used.)

Continuous measurement function and an extensive selection of other measuring functions
-Continuous measurement with up to 12 steps, and various measurements including a B-H curve, core loss curve, µ- characteristics and L-characteristics, are available.

High-speed, high-precision measurement
-High-speed measurement in approx. 3 seconds can be performed. In addition, an FFT arithmetic circuit permits automatic compensation and calibration of frequency characteristics, enabling high-precision
measurements.

Printer provided as standard (built-in)
-Measurement results can be printed out immediately. Convenient for data sorting.

GP-IB interface provided as standard
-An automated measurement system in combination with a PC can be configured.

Easy-to-view 9-inch color CRT display

Easy operation with pop-up menu system
-Pop-up menus are displayed on the CRT to facilitate operation.
-Results are displayed as graphs or lists.

Enhanced measurement efficiency with a wide range of options
-Options include an external power amplifier and sample connection pod for various use.

Description

The SY-8232 high-frequency B-H analyzer is the flagship of IWATSU’s line of B-H analyzers.

It has a high-frequency B-H curve tracing capability over an ultrawide-range measurement frequency from 10 Hz (optionally 1 Hz) to 10 MHz.

The SY-8232’s compact design makes it ideal for desktop use. It incorporates features required for measuring high-frequency magnetic characteristics, including an oscillation circuit, power amplifier circuit, high-speed digitizer, operation control circuit and a printer.

The built-in 25 VA power amplifier allows direct measurement of small specimens such as magnetic heads, while use of an external power amplifier enables measurement of large amplitude characteristics and saturation characteristics of power ferrite or ultrathin amorphous materials. The lower limit frequency is as low as 10 Hz (optionally 1 Hz), permitting the measurement of near DC magnetic characteristics of soft magnetic materials. As the analyzer allows both near DC and AC, the measurements of coercive force (Hc) related to magnetic wall production, migration and extinction can be more effective and research and testing in materials development can be performed more quickly.

Specifications

Measurement modes	Core loss measurement: Frequency (f) or maximum magnetic flux density (Bm) can be varied. B-H curve measurement: Frequency (f) or maximum magnetic field (Hm) can be varied. Permeability measurement: Frequency (f) can be varied.
Measured items	Core loss measurement: Max. magnetic flux density (Bm), residual magnetic flux density (Br), max. magnetic field (Hm), coercive force (Hc), core loss (Pc, Pcv, Pcm), phase (q), amplitude permeability (µa), hysteresis loss (Ph), eddy-current loss (Pe). B-H curve measurement: Max. magnetic flux density (Bm), residual magnetic flux density (Br), max. magnetic field (Hm), coercive force (Hc), core loss (Pc, Pcv, Pcm), phase (q), amplitude permeability (µa), differential permeability (µdiff), square ratio (Br/Bm), total magnetic flux change (2f m) Permeability measurement: Max. magnetic flux density (Bm), max. magnetic field (Hm), core loss (Pc), phase (q), amplitude permeability (µa), inductance (L), complex permeability (µ’, µ”).
Operation modes	Single: One measurement step with one operation. Continuous: Up to 12-step preset schedules (frequencies or amplitudes) can be measured continuously with one operation.
Set frequency	10 Hz (optionally 1 Hz) to 10 MHz, 2 digits effective Accuracy: ±0.1% for the set value.
Measurement time	Approx. 3 sec./step (when the measured frequency is 1 kHz or more)
Oscillating section	Oscillation frequency: 10 Hz to 10 MHz, sine wave Output voltage/resistance: 0 to ±2.5 V/50 ½ Built-in excitation control in 3 steps of approximate value, asymptotic and demagnetization.
Excitation section	Output voltage ±50 V max., output current ±1 A max. ( 1.1 kHz) or ±4 A max. (10 Hz (optionally 1 Hz) to 1 kHz). Output impedance 1 ½ + 0.1 µH, output power 25 VA.
Detection section (standard)	Excitation current detection System: Voltage drop across two ends of non-inductive resistance. Detection sensitivity: ±50 mA to ±5 A (1-2-5 steps) Frequency bandwidth: DC to 100 MHz Magnetic flux detection System: Detection of voltage (induced voltage) across two ends of detection coil. Detection sensitivity: ±50 mA to ±50 V (1-2-5 steps) Frequency bandwidth: DC to 100 MHz
Storage section	Sampling rate: 512 times the set frequency (synchronized with the built-in oscillator). Resolution: 16 bits
Display section	System: 9-inch color CRT Contents: Measuring condition, characteristic values, B-H curve, characteristic graphs
Printer (Built-in)	Heat-sensitive dot line system. Paper width approx. 112 mm, printing time no more than approx. 5 sec.
External interface	GP-IB interface
Power supply	100 V AC (90 ~ 132 V) or 200 V AC (180 – 250 V) models.Approx. 800 W (100 V AC)
Dimensions & weight	Main unit: Approx. 420W x 350H x 520L mm (excluding the pod), approx. 34 kg (SY-8232 mainframe + SY-301 measurement unit)
Environment	Operating temperatures +5°C to +35°C (+10°C to +30°C when the printer is used)
Performance guaranteed temperatures	+18°C to +28°C
Provided accessories	SY-921 measurement pod (1 set), power cords (2), connection cables (1 set), estimation samples (1 set), adapters for calibration (1 set), Thermal paper (2 rolls), fuses (4), instruction manual (1), dust cover (1), accessory case (1).

Models, Options, & Accessories

Model	Description	List Price	Sale Price
SY-8232	Please call or email us for pricing and availability.
Model	Accessories	List Price	Sale Price
SY-922	Please call or email us for pricing and availability.
SY-931	Please call or email us for pricing and availability.
SY-927	Please call or email us for pricing and availability.
SY-928	Please call or email us for pricing and availability.
SY-937	Please call or email us for pricing and availability.
SY-924	Please call or email us for pricing and availability.

寻找更多销售、技术和解决方案的信息？

联系我们 >

IWATSU SY-8232/SY8258 岩崎软磁性材料交流BH饱和BS及损耗分析仪-停产

请您留言