IWATSU CS-10800/CS-10400 10KV-30KV Japan Iwasaki Ultra-High-Power IV Curve Tracer

Model：CS-10800/CS-10400 Country of Origin：Japan

Category：Semiconductor Parameter Analyzer

Overview：

World-leading static parameter analysis for power devices, with output capability up to 10 kV and 8000 A, ideally suited for evaluating static parameters and analyzing the performance of wide-bandgap materials such as SiC, GaN, and diamond.

Downloads

IWATSU CS-3000 CS-5000 CS-10000 Semiconductor Parameter Analyzer Specification Brochure

Features

Specifications

Application Notes

Functions & Configuration

Power Curve Tracer CS-10000 Series

Ultra-High Voltage / High Current Built on the

CS-10400
Maximum peak voltage:	10kV
Maximum peak current:	4,000A

CS-10800
Maximum peak voltage:	10kV
Maximum peak current:	8,000A

CS-12800
Maximum peak voltage:	12kV
Maximum peak current:	8,000A

CS-15800
Maximum peak voltage:	15kV
Maximum peak current:	8,000A

Pulse power supply option

Optional accessory to prevent characteristic drift and damage caused by heat
Rise time selectable in 3 steps; pulse width adjustable from 1 ms to 20 ms; interval adjustable from 100 ms to 2 s.
(This optional feature is installed inside the curve tracer and must be factory-installed. Existing users who wish to add this function must return the main unit to the factory for installation.)

Semiconductor Curve Tracer Product List

Product Name		Model	Remarks
Main unit	Semiconductor curve tracer	CS-3100	3 kV
		CS-3200	3 kV, 400 A
		CS-3300	3 kV, 1,000 A
		CS-5100	5 kV
		CS-5200	5 kV, 400 A
		CS-5300	5 kV, 1,000 A
		CS-5400	5 kV, 1,500 A
		CS-10400	10 kV, 4,000 A (made to order)
		CS-10800	10 kV, 8,000 A (built to order)
		CS-12800	12 kV, 8,000 A (built to order)
		CS-15800	15 kV, 8,000 A (built to order)
Test bench	Test bench S	CS-301	CS-3100 Standard Accessories
	Test Station M	CS-302	CS-3300/CS-3200 Standard Accessories
		CS-303	CS-5300/CS-5200/CS-5100 Standard Accessories
		CS-304	CS-5400 Standard Accessories
	Test Station L	CS-305	Equipped with warning light, thermal switch, cooling fan, LED lighting, and auto-lock
		CS-307	Compatible with scanning systems; auto-lock
		CS-307H	CS-5400 compatible
	Test stage with heating plate function	CTJ1050	Heater surface with 5 kV insulation; max. temperature 200°C; auto-lock function
External Setpoint Controller		IE-1310	One-touch controller that reads setpoints from external storage
Hot Plate		PA3020	Heating area 200×200 mm, max. temperature 300°C
		PA3040	Heating area 200×400 mm, max. temperature 300°C
		PA4030	Heating stage size 300×200 mm, max. temperature 400°C
Probe station connection cable		CS-306-3k	For CS-3000
		CS-306-5k	For CS-5000 (except CS-5400)
		CS-308	For CS-5400
Alligator clip	Mini Alligator Clips, Red, 10-Piece Set	CS-001	–
Alligator clip	Mini Alligator Clips, Black, 10-Piece Set	CS-002	–
Test Leads	High-Voltage Leads, Red, 5-Piece Set	CS-003	Banana plug, 5 kV, 30 cm
	Standard wire, black, 5-piece set	CS-004	Banana plug, 30 cm
	Standard wire set	CS-005	Standard configuration for all models except CS-3100. Banana plug, 30 cm (HV: 2 red, 2 green, 2 black, 1 yellow); alligator clips (2 red, 2 green, 2 black, 1 yellow)
	Dedicated cable for high-current use	CS-006	20 cm, set of 2, standard with CS-5400
	Dedicated cable for high current	CS-007	30 cm, set of 2, standard with CS-10400/10800
Software	Semiconductor parameter sweep	CS-800	Built into the main unit
	Bidirectional sweep	CS-801	Installed in the main unit
	Semiconductor parameter testing	CS-810	Installed on a PC
Option for ThermoStream(R)		CS-310	Works with the CS-521/522/523 for temperature testing on the ThermoStream®
		CS-521	Test fixtures for TermoStream(R), dedicated fixture for CS-310
		CS-522	TO-263-3 / D2PAK (high-temperature CS-503), under development
		CS-523	TO252-3 (high-temperature CS-504), under development
Test fixture	Blank test fixture (no socket installed)	CS-500	1 pc, standard accessory
	TO Package Test Fixture	CS-501A	TO-220, TO-247
	AXIAL Package Test Fixture	CS-502	AXIAL
	TO-263-3 (D2PAK) Package Test Fixture	CS-503	TO-263-3 / D2PAK
	TO-252-3 Package Test Fixture	CS-504	TO252-3
	TO-263-7 Package Test Fixture	CS-505	TO263-7
	TO-252-5 Package Test Fixture	CS-506	TO252-5 ※Pin assignments for pins #1, 2, 4, and 5 must be specified.
	SC-70-3 (SOT-323-3) Package Test Fixture	CS-507	SC-70-3, SOT-323-3
	SMD Chip Test Fixture	CS-508	2-terminal for SMD
	SC-59A Package Test Fixture	CS-509	SC-59A/SOT-23-3
	SC-62 Package Test Fixture	CS-510	SC-62/SOT-89
Scanning System	Switch Control Unit	CS-701	Central Control for All Units
	LV Relay Unit	CS-702	300 V/30 A, 10 channels
	HV relay unit	CS-703	5 kV/3 A, 10 channels
	HC relay unit	CS-704	2 kV/1,000 A, 10 channels
	HV-HC switching unit	CS-705	5 kV/1,000 A output unit with HV/HC switching
	Output unit	CS-706	5 kV/15 A
	Gate short-circuit unit	CS-707	Curve tracer section: 300 V/8 A; module section: 5 kV/8 A, 10 channels
	HV-HC relay unit, 2 channels	CS-708	5 kV/1,500 A, 2-channel
	HV/HC relay unit, 4-channel	CS-709	5 kV/1,500 A, 4-channel
	HV/HC switching unit (for CS-5400)	CS-710	5 kV/1,500 A output unit with HV/HC switching
	Control cable	–	Connect the CS-701 to each scan unit (the CS-707 requires 2 cables)
	Low-voltage cable	–	–
	High-voltage cable	–	–
	High-current cable	–	–
	High-Temperature Cable	–	–
Tester Cart		MT-600L	Max. Load: 100 kg

Semiconductor Curve Tracer CS-10000SeriesSpecifications

CS-10000SeriesSpecifications

Collector power supply HVMode

Model	CS-10000Common across series
Mode/Polarity	Full-wave rectification/+－、DC/+－、LEAKAGE/+－、AC
Maximum peak voltage/Current	Maximum Peak Voltage / Maximum Peak Current (Maximum Peak Pulse Current)3kV75mA（150mA）300V750mA（1.5A）30V7.5A（15A*）
Maximum peak power	120mW/1.2W/12W/120W/390W（Maximum peak voltage3kVNot available when)

Collector power supply　UHVMode

Model	CS-10400/10800	CS-12800	CS-15800
Mode/Polarity	DC ／+
Maximum peak voltage/Current	Maximum peak voltage / maximum peak current10kV400mA	Maximum peak voltage / maximum peak current12kV266mA	Maximum peak voltage / maximum peak current15kV266mA
Maximum peak power	40W / 400W / 4kW	32W / 320W / 3.2kW	40W/400W / 4kW

Collector power supply HCMode

Model	CS-10400	CS-10800 / 12800 / 15800
Mode/Polarity	Pulse／+－
Maximum peak current Maximum peak power Maximum peak voltage	Maximum peak voltage / maximum peak current / Power60V4000A / 60kW60V400A / 6kW60V40A / 600W	Maximum peak voltage / maximum peak current / Power40V8,000A / 80kW60V4,000A / 60kW60V4000 / 6kW60V40A /600W
Pulse width	50μs～900μs、50μs～1,200μs（8,000Ahours)(10μsresolution)
Test point	Test points can be specified (10μresolution)
Vertical axis range	100mA～1,000A/div

コレクタサプライHCMode Scan system

Mode			Content
Waveform compensation	Hardware		Compensates floating capacitance between collector supply and ground
	Software		Waveform compensation via software thinning function
Step signal generator	Offset	Setting range Resolution	STEP AMPLITUDEConfigured-10times～+10倍 STEP AMPLITUDEConfigured1%
	Current mode	Amplitude range Maximum current Maximum voltage	1Step approx.50nA～200mA、21段　1-2-5Switch 2A 10Vand above
	Voltage mode	Amplitude range Maximum current Maximum voltage	Approx. per step50mV～2V、6段　1-2-5Switch ±40V 500mA～（～8V）、200mA～（～15V）、10mA～（～40V）
	Step period		50Hz或60Hz的2times (ACin mode is1times),HCPulse interval in mode
	Pulse/step	Pulse width	50μs～400μs （10μsstep) HCIn mode, relative to collector power supply pulse before/after100μsPulse width of
	Number of steps		0～20段
AUXOutput	Range		OFF、－40V～+40V （100mVStep adjustable)
Test mode			REPEAT、STOP/SINGLE、SWEEP
Vertical axis (Full range0div）	Collector current	Range	HVMode:1μA/div～2A/div、20Step　1-2-5Switch (HCmode specified separately))
		Accuracy	Reading2%+0.05×VERT/div plus waveform compensation error of max. peak voltage below 0.5μA （30V）、1μA （300V）、6μA （3kV）、12μA （5kV） 30V,300V,3kVof maximum peak voltage10%and above,5kV为30%and above
	Emitter current （LEAKAGE）	Range	1nA/div～2mA/div、20Step　1-2-5Switch (Collector supply mode isLEAKAGE）
		Accuracy	Reading2%+0.05×VERT/div+1nAand below
Horizontal axis (full range10div）	Collector voltage	Range	HCMode:50mV/div～5V/div、7Step 1-2-5Switch (HVmode specified separately)
		Accuracy	Reading2%+0.05×HORIZ/divand below
	Gate-drain voltage	Range	50mV/div～5V/div、7Step　1-2-5Switch
		Accuracy	Reading2%+0.05×HORIZ/divand below
Display	Display		8.4inch TFTLCD display
	Number of data		1,000点/Curve (AC, full-wave rectification) 20～1,000点/Curve (SWEEPMode)
	Curve display		Lines, dotted lines
	Average		OFF、2～255次
	Length		OFF、SHORT、LONG, infinite length
	Internal waveform save (REF）		4 screens
Cursor measurement	DOT		Vert、Horiz、β或gm
	fLINE		Vert、Horiz、1/grad, intercept
	FREE		Vert、Horiz、β或gm
	WINDOW		WINDOWRange ofVert、Horiz、β 或gm
Data save/Read	Internal storage		Setting parameters:256pcs,REF：4Screen
	External storage		USB1.1: setting parameters, waveform, screen copy (BMP、TIFF、PNG）
Remote control			由LANConnect Remote Control　10BASE-T/100BASE-TX 1Port
Power supply	CS-1xxxx		AC200VSingle-phase50/60Hz, Maximum power during operation:10kV
Dimensions(mm) (excluding protrusions and accessories) Mass (excluding accessories)	CS-10400,10800, 12800,15800		1,110W x 1,216H x 1,150D, approx.370kg

Semiconductor characteristic curve tracingOptions

■Options

CS-301

Test bench S

CS-3100 standard configuration

CS-302

Test bench M

CS-3200/3300 standard configuration

CS-303

Test bench M

CS-5100/5200/5300 standard configuration

CS-304

Test bench M

CS-5400 standard configuration

CS-305

Test bench L

Equipped with warning light, thermostat, cooling fan, LED lighting
Dimensions 630W×520H×530D (mm)

CS-307

Test bench L (for CS-3000/5000)

Equipped with auto-lock, compatible with scanning system
Dimensions 500W×520H×520D (mm)
Image shows the scenario with connection cable for CS-5400 installed

CS-307H

Test bench L

For CS-5400

CS-306

Probe station connection cable

For CS-3000/5000 (except CS-5400)

CS-308

Probe station connection cable

For CS-5400

CTJ1050

Test bench with heating function

Manufacturer: CATS Electronic Design Co., Ltd.
Maximum temperature: 200ºC
Maximum voltage applicable to module: 5kV (5kV insulation treatment on heater surface)
Maximum current: auto-lock function
(Automatically stops the curve tracer signal output when the cassette is opened)

PA-3020/3040/4030

Hot plate

Manufacturer: MSA Co., Ltd.
Maximum temperature: 300ºC
Real-time temperature monitoring via external probe, RS485 control
CE certified
(Accessories: controller, temperature probe, RS485-USB converter)
- Heating section dimensions -
PA3020: 200×200 (mm) Power consumption: 800W
PA3040: 200×400 (mm) Power consumption: 1500W

CS-310

Test fixture for ThermoStream(R)

Used with the dedicated socket for ThermoStream(R) fixtures, enabling temperature testing with ThermoStream(R).
　[Dimensions (mm): approx. 300W×200H×300D]
　[Power: AC power]

CS-521

Dedicated socket for ThermoStream(R) test fixtures
Compatible package: TO (heat-resistant CS-501A)

CS-522

Dedicated socket for ThermoStream(R) test fixtures
Compatible package: TO-263-3 (D2PAK)
(heat-resistant CS-503)

CS-523

Dedicated socket for ThermoStream(R) test fixtures
Compatible package: TO-252-3 (heat-resistant CS-504)

IE-1310

CS setup controller

Simple exchange of setting conditions, suitable for production line operations.

■ Test fixture options

CS-500 Test fixture (standard accessory) For user modification/development, directly Fixture for connecting to the test bench for testing.
Heat-resistant TO socket 200℃、350A （500μs）
TSSOP 14 socket ※Test bench CS-301 not usable
CS-501A TO TYPE
CS-502 AXIAL
CS-503 TO-263-3（D2PAK）
CS-504 TO-252-3
CS-505 TO-263-7
CS-506 TO-252-5
CS-507 SC-70-3（SOT-323-3）
CS-508 SMD
CS-509 SC-59A（SOT-23-3）
CS-510 SC-62（SOT-89）

■Scanning system CS-700 series

CS-701 Power control unit Component required when connecting to a PC via LAN and controlling each unit with semiconductor parameter test software CS-810. One unit can control up to 8 components. Multiple devices (up to 10) can be controlled simultaneously via IP address settings.
CS-702 LV relay unit 300V/7.5A/30A(Pulse) 10CH
CS-703 HV Relay Unit 5kV/0.5A 10CH
CS-704 HC Relay Unit 2kV/7.5A/1,500A(Pulse) 10CH
CS-705 HV/HC Changeover Switch Unit 5kV/1,000A(Pulse) HV/HC Changeover Function (Manual) (For CS-5300/5200/3300/3200)
CS-706 External Output Unit 5kV/1,000A(Pulse) Modification required when using CS-5400
CS-707 Gate short-circuit assembly When testing the 6-in-1 module, the G-E or C-G terminals of untested chips can be shorted Curve tracer section: 300V/7.5A/15A (Pulse) Module section: 5kV/7.5A/15A (Pulse) 10CH
CS-708 HV-HC Relay Unit 5kV/7.5A/1,500A(Pulse) 2CH
CS-709 HV-HC Relay Unit 5kV/7.5A/1,500A(Pulse) 4CH
CS-710 HV/HC Changeover Switch Unit HV/HC Changeover Switch Unit

■Cable options

CS-001 Small alligator clip set Small alligator clip, red, 10-piece set
CS-002 Small alligator clip set Small alligator clip, black, 10-piece set
CS-003 High-voltage cable set (5 cables)
CS-004 Wire Set (5 pcs)
CS-005 Standard Test Lead Set (Standard configuration for all models except CS-3100)
CS-006 High Current Wiring ・Blue (20cm), Black (20cm) ※Terminals, length, withstand voltage, etc. customizable (Standard with CS-5400)
CS-007 High Current Wiring ・Blue (30cm), Black (30cm) ※Terminals, length, withstand voltage, etc. customizable (CS-10400/10800/12800/15800 standard configuration)