Cybertek DP6150B (1500V/200MHz) Zhiyong High Voltage Differential Probe

DP6000 Series High-Voltage Differential Probes are high-voltage differential probes with floating measurement capability.

Their bandwidth reaches up to 200MHz, meeting the needs of most test systems;

A wide selection of ranges is available, and their differential measurement voltage range meets the requirements of most test circuits;

Users can enter test mode to adjust the offset voltage. If an offset phenomenon occurs after long-term use of the probe, users can enter this mode to adjust the offset and achieve zeroing;

Electronic touch buttons provide a longer service life;

With a 5MHz bandwidth limit function option, the 5MHz frequency bandwidth meets the measurement of the switching frequency of FETs in most switching power supplies and can filter out higher-frequency noise and interference;

Equipped with an audible and visual alarm function, and the audible alarm can be manually turned off, providing a more user-friendly design;

USB power supply interface, making use more convenient and flexible;

The probe is equipped with a standard BNC output interface and can be used with oscilloscopes from any manufacturer (the oscilloscope input impedance is required to be set to 1MΩ;

when 50Ω is selected, the attenuation ratio will be attenuated by an additional factor of two), to measure the waveform of the circuit under test;

Automatic save function prevents users from repeating operations after power loss. The probe has good common-mode noise rejection capability, and the input end has high input impedance and low capacitance, enabling accurate and high-speed measurement of differential voltage signals. It can be widely used in R&D, debugging, or maintenance work for switching power supplies, inverters, electronic ballasts, inverter home appliances, and other electrical power devices.