IWATSU SE-6000 / SE-6010 Fiber-Optic Isolated 4-Channel Differential Probe Compatible with Oscilloscopes, Japan IWATSU

Model：SE-6000 / SE-6010 Country of Origin：Japan

Category：Optically isolated voltage probe

Overview：

Solve waveform testing challenges in high-risk scenarios such as high-voltage floating tests of power electronics, ultra-high-voltage switches, substation GIS circuit breakers, and UHV transformers.

Features

Specifications

Application Notes

Functions & Configuration

Isolation Probe SE-6000 / SE-6010

By building a measurement system in which the input and output are optically isolated, high-voltage waveform measurement can be performed with peace of mind

Overview

●Contributes to measurement safety in high-voltage environments

●High-quality floating measurement is possible with excellent common-mode rejection performance

●Extremely effective for noise-resistant measurement

●Supports a wide range of applications such as lightning surges and charging tests

●Measurement at remote locations (switches, transportation equipment, etc.)

●Failure cause analysis when an abnormality occurs at a remote location
(Up to 4 isolation units can be installed at separate locations)

Appearance

Measurement Applications

Connection Image

1.Isolation Probe System Specifications

Item	Specifications
Number of channels	1～4CH(SE-6000Per unitSE-6010 up to4Units connectable)
Frequency bandwidth (	30MHz　-3dB
Rise time at termination)	.133ns　(Typical value)
Receiver output impedance	50Ω±1.5%
Bandwidth limit	10MHz　±3MHz、1MHz　±0.3MHz、100kHz　±30kHz
Attenuation characteristics	-6dB/oct
Probe sense	■Auto detect 1 : 1、10 : 1、100 : 1、1000 : 1 ■Manual setting 1 : 1、 5 : 1、 10 : 1、 20 : 1、 50 : 1、 100 : 1、 200 : 1、500 : 1、 1000 : 1、 2000 : 1
CMRR	100dB(80Hztime)
at termination)	DC～5MHz : ±0.3dB / 5MHz～10MHz : ±1dB
Input impedance	1MΩ(±1%）//20pF（±2pF)
Input range (full scale)	■Output range　±1V(50Ω)/±2V(1MΩwhen selected) ±50mV、±100mV、±200mV、±500mV、±1V、±2V、±5V、±10V、±20V、±50V ■Output range　±0.8V(50Ω)/±1.6V(1MΩ)when selected ±40mV、±80mV、±200mV、±400mV、±800mV、±2V、±4V、±8V、±20V、±40V Input voltage range = input range setting − offset setting
Input coupling	DC, AC, GND
Lower frequency limit when coupled	<10Hz
Output voltage	■Output range±1V(50Ω)/±2V(1MΩ)when selected 50ΩTermination　±1V　１MΩTermination　±2V ■Output range±0.8V(50Ω)/±1.6V(1MΩwhen selected) 50ΩTermination　±0.8V １MΩTermination　±1.6V
Noise(RMS)	0.07%FS
Gain accuracy	■1MΩWhen terminated After self-calibration at operating temperature　±0.3% at operating temperature　±1% ■50ΩWhen terminated 1MΩAdd the following to the terminated value. (50ΩTermination resistance error [%】 - SE6000Output impedance error [%】)/2Approximate formula)
Offset voltage range	～±500mVレンジ : ±1V ±800mV～±5Vレンジ : ±10V ±8V～±50Vレンジ : ±100V
Offset accuracy	■After self-calibration at operating temperature ±0.5%(setting value)±0.3％FS±0.05mV(input-referred value) ■at operating temperature ±0.5%(setting value)±5％FS±1mV(input-referred value)
Nonlinearity	±0.05%FS
Maximum input voltage	BNCCenter contact-BNCBetween shells: 400Vpeak BNCShell (chassis)-To ground: 1kVpeak
Propagation delay	1.089μs±0.015μs+5ns/m 5ns/mis the optical fiber cable delay, for reference only.
Inter-skew	20nsor less (excluding cable delay difference)
Calibration output	Square wave / 1kHz±0.5% / Output amplitude 3V±2%
Self-calibration	Self-calibrates amplitude and offset
Warm-up time	30分
Auto range	Automatically adjusts offset and range
Save/Recall	Save destination: USBMemory, internal memory (max.10pcs) / Target data: Setup

II. Isolation amplifier SE-6000(Receiver side) specifications

Item	Specifications
Display	4.3"カラーLCD
Interface	USB ： USB2.0Host (for save/recall) LAN ： 100Base-TX(for remote control)
Power supplyA	C 100V～240V (50/60Hz)
Power consumption	Maximum30VA
Operating temperature	0℃～40℃
Guaranteed performance temperature	10℃～35℃
Operating humidity	5% ～ 80% RH(no condensation)
Storage temperature	-20℃～+60℃
Storage humidity	5% ～ 80% RH(no condensation)
Height	2000mand below
External dimensionsDimensions	約226W x 100H x 366D mm　(excluding protrusions)
Main unit weight	2.5kg
Accessories	User's guide, instruction manual (CD), power cord, cord strap: each1個

3. Isolation unit SE-6010(Transmitter side) Specifications

Item	Specifications
Battery	1 pc standard included, max.2units can be installed
Operating time	New, fully charged,25℃にて Batteryー1pcs: 15Time Batteryー2pcs: 30Time
Operating temperature	-15℃～+50℃
Operating humidity	5% ～ 80% RH(no condensation)
Storage temperature	-20℃～+60℃
Storage humidity	5% ～ 80% RH(no condensation)
Height	2000m
External dimensionsDimensions	約90W x 203H x 298D mm
Main unit weight	2.4kg(excluding battery)
Accessories	SE-601Batteryパック　1個

IV.Optical interface

Item	Specifications
Light source semiconductor laser	クラス1
Optical fiber	Single mode
Optical connector	SE-6010 ： 2連LCConnector×1 SE-6000 ： 2連LCConnector×4

V.Configuration

Product name		Model name
Isolation amplifier (receiver side)		SE-6000
Isolation unit (transmitter side)		SE-6010
pcs can be charged simultaneously) "Dedicated		SE-603
用		SE-601
Optical Fiber Cable	3m	SE-605
	10m	SE-606
	50m	SE-607
	200m	Custom orders available